Fiat 110-90 (DT) vs Massey Ferguson MF 4270 (A)

6 material differences · fewer than 12

Tractor one

1986–2003

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 110-90 (DT) and the MF 4270 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 9 fields identical or within 5%, which is not counted as material

Fiat 110-90 (DT) and Massey Ferguson MF 4270 (A), field by field
Field	110-90 (DT)	MF 4270 (A)	Gap
Engine
Engine power, claimed claimed	109 hp	109 hp	—
Engine declared	FIAT-IVECO 8065.05	Perkins 1006-6 HR3	differs
Displacement declared	5.86 L	5.99 L	—
Maximum torque declared	258 lb·ft · 350 N·m	305 lb·ft · 414 N·m	+18% MF 4270 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry and air-cooled single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	15.1 gpm · 57.0 L/min	—	—
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	10,002 lb · 4,537 kg	10,185 lb · 4,620 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,436 lb · 4,280 kg	8,554 lb · 3,880 kg	+10% 110-90 (DT)
Maximum permissible mass declared	14,330 lb · 6,500 kg	15,432 lb · 7,000 kg	+8% MF 4270 (A)
Wheelbase declared	101.7 in · 2,584 mm	102.7 in · 2,609 mm	—
Length declared	178.9 in · 4,544 mm	172.8 in · 4,390 mm	—
Width declared	77.6 in · 1,970 mm	78.3 in · 1,990 mm	—
Height declared	103.3 in · 2,625 mm	106.8 in · 2,713 mm	—
Ground clearance declared	18.9 in · 481 mm	13.8 in · 350 mm	+37% 110-90 (DT)
Turning radius, braked declared	12.5 ft · 3.82 m	—	—
Fuel tank declared	140.5 qt · 133.0 L	213.5 qt · 202.0 L	+52% MF 4270 (A)

Source

Source