Fiat 110-90 (DT) vs Landini 12.500 (DT)

11 material differences · fewer than 12

Tractor one

1986–2003

No measured PTO figure

Tractor two

1978–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 110-90 (DT) and the 12.500 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 110-90 (DT) and Landini 12.500 (DT), field by field
Field	110-90 (DT)	12.500 (DT)	Gap
Engine
Engine power, claimed claimed	109 hp	108.5 hp	—
Engine declared	FIAT-IVECO 8065.05	Perkins A 6.354	differs
Displacement declared	5.86 L	5.80 L	—
Maximum torque declared	258 lb·ft · 350 N·m	276 lb·ft · 374 N·m	+7% 12.500 (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated dry LUK dual clutch	—
Hydraulics & hitch
Pump flow declared	15.1 gpm · 57.0 L/min	16.4 gpm · 62.0 L/min	+9% 12.500 (DT)
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	10,002 lb · 4,537 kg	10,582 lb · 4,800 kg	+6% 12.500 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,436 lb · 4,280 kg	10,604 lb · 4,810 kg	+12% 12.500 (DT)
Maximum permissible mass declared	14,330 lb · 6,500 kg	—	—
Wheelbase declared	101.7 in · 2,584 mm	111.8 in · 2,840 mm	+10% 12.500 (DT)
Length declared	178.9 in · 4,544 mm	184.6 in · 4,690 mm	—
Width declared	77.6 in · 1,970 mm	97.2 in · 2,470 mm	+25% 12.500 (DT)
Height declared	103.3 in · 2,625 mm	113.2 in · 2,875 mm	+10% 12.500 (DT)
Ground clearance declared	18.9 in · 481 mm	17.7 in · 450 mm	+7% 110-90 (DT)
Turning radius, braked declared	12.5 ft · 3.82 m	—	—
Fuel tank declared	140.5 qt · 133.0 L	190.2 qt · 180.0 L	+35% 12.500 (DT)

Source

Source