Fiat 110-90 (DT) vs John Deere 7210

11 material differences · fewer than 12

Tractor one

1986–2003

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 110-90 (DT) and the 7210 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 110-90 (DT) and John Deere 7210, field by field
Field	110-90 (DT)	7210	Gap
Engine
Engine power, claimed claimed	109 hp	109 hp	—
Engine declared	FIAT-IVECO 8065.05	John Deere 6.068 TRW-50	differs
Displacement declared	5.86 L	6.79 L	+16% 7210
Maximum torque declared	258 lb·ft · 350 N·m	324 lb·ft · 439 N·m	+25% 7210
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	—	Pedal-operated, hydraulic-wet John Deere multi-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	15.1 gpm · 57.0 L/min	27.3 gpm · 103.3 L/min	+81% 7210
Pressure declared	3,046–3,118 psi · 210–215 bar	2,944–3,031 psi · 203–209 bar	—
Three-point lift at ends declared	10,002 lb · 4,537 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,436 lb · 4,280 kg	11,490 lb · 5,212 kg	+22% 7210
Maximum permissible mass declared	14,330 lb · 6,500 kg	—	—
Wheelbase declared	101.7 in · 2,584 mm	111.8 in · 2,840 mm	+10% 7210
Length declared	178.9 in · 4,544 mm	174.6 in · 4,435 mm	—
Width declared	77.6 in · 1,970 mm	96.0 in · 2,438 mm	+24% 7210
Height declared	103.3 in · 2,625 mm	113.4 in · 2,880 mm	+10% 7210
Ground clearance declared	18.9 in · 481 mm	15.7 in · 400 mm	+20% 110-90 (DT)
Turning radius, braked declared	12.5 ft · 3.82 m	—	—
Fuel tank declared	140.5 qt · 133.0 L	199.7 qt · 189.0 L	+42% 7210

Source

Source