Fiat 110-90 (DT) vs John Deere 4040 (A)

11 material differences · fewer than 12

Tractor one

1986–2003

No measured PTO figure

Tractor two

1977–1985

No measured PTO figure

Which should you choose?

Read our verdict on the 110-90 (DT) and the 4040 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 110-90 (DT) and John Deere 4040 (A), field by field
Field	110-90 (DT)	4040 (A)	Gap
Engine
Engine power, claimed claimed	109 hp	109 hp	—
Engine declared	FIAT-IVECO 8065.05	John Deere 6.359 TL	differs
Displacement declared	5.86 L	5.88 L	—
Maximum torque declared	258 lb·ft · 350 N·m	299 lb·ft · 405 N·m	+16% 4040 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated hydraulic and oil-cooled double-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	15.1 gpm · 57.0 L/min	25.4 gpm · 96.0 L/min	+68% 4040 (A)
Pressure declared	3,046–3,118 psi · 210–215 bar	3,481 psi · 240 bar	differs
Three-point lift at ends declared	10,002 lb · 4,537 kg	9,039 lb · 4,100 kg	+11% 110-90 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,436 lb · 4,280 kg	11,171 lb · 5,067 kg	+18% 4040 (A)
Maximum permissible mass declared	14,330 lb · 6,500 kg	16,535 lb · 7,500 kg	+15% 4040 (A)
Wheelbase declared	101.7 in · 2,584 mm	104.0 in · 2,642 mm	—
Length declared	178.9 in · 4,544 mm	176.5 in · 4,483 mm	—
Width declared	77.6 in · 1,970 mm	78.3 in · 1,990 mm	—
Height declared	103.3 in · 2,625 mm	112.6 in · 2,861 mm	+9% 4040 (A)
Ground clearance declared	18.9 in · 481 mm	20.3 in · 515 mm	+7% 4040 (A)
Turning radius, braked declared	12.5 ft · 3.82 m	—	—
Fuel tank declared	140.5 qt · 133.0 L	147.9 qt · 140.0 L	+5% 4040 (A)

Source

Source