Fiat 1000 Super (TD) or Steyr 8120 (a)?

Which should you choose?

On performance, every comparable figure that differs favours the Steyr 8120 (a): three-point lift.

  • The Steyr 8120 (a) suits loader and hydraulic implement work better on this data: 27% (863 kg / 1,903 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 1000 Super (TD) and Steyr 8120 (a), with the call on each
Question1000 Super (TD)8120 (a)Call
Which puts more power through the PTO shaft?67.7 kW (90.7 hp)Traktorenlexikon, “Fiat 1000-S/1000-S DT”67.0 kW (89.8 hp)Traktorenlexikon, “Steyr 8120”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 1000 Super (TD) and the 8120 (a).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 1000 Super (TD) and the 8120 (a).
Which pumps more oil for implements?35.5 L/min (9.4 gpm)Traktorenlexikon, “Steyr 8120”No figureNo call on hydraulic flow: no figure on record for the 1000 Super (TD).
Which lifts more on the three-point hitch?3,200 kg (7,055 lb)Traktorenlexikon, “Fiat 1000-S/1000-S DT”4,063 kg (8,957 lb)Traktorenlexikon, “Steyr 8120”AheadThe Steyr 8120 (a) has 27% more lift (863 kg / 1,903 lb) than the Fiat 1000 Super (TD) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,620 kg (7,981 lb)Traktorenlexikon, “Fiat 1000-S/1000-S DT”3,845 kg (8,477 lb)Traktorenlexikon, “Steyr 8120”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?6,380 kg (14,065 lb)Traktorenlexikon, “Fiat 1000-S/1000-S DT”No figureNo call on maximum permissible mass: no figure on record for the 8120 (a).
Which has the wider choice of gears?12 to 16Traktorenlexikon, “Fiat 1000-S/1000-S DT”12 to 15Traktorenlexikon, “Steyr 8120”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 1000 Super (TD) and the 8120 (a).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Fiat 1000-S/1000-S DT”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Steyr 8120”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 1000-S/1000-S DT”540/1000 rpmTraktorenlexikon, “Steyr 8120”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 1000-S/1000-S DT”independentTraktorenlexikon, “Steyr 8120”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 1000-S/1000-S DT”2WD / 4WDTraktorenlexikon, “Steyr 8120”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1976–19791978–1984EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr 8120 (a) has 27% more lift (863 kg / 1,903 lb) than the Fiat 1000 Super (TD) (both lift at the hitch ends, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources