7 material differences · fewer than 12
Tractor oneFiat 1000 Super (TD)1976–1979No measured PTO figureTractor twoSOMECA 980 (TD)1979–1983No measured PTO figure
Which should you choose?
Read our verdict on the 1000 Super (TD) and the 980 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 1000 Super (TD) | 980 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 108.5 hp | 96.7 hp | +12% 1000 Super (TD) |
| Engine declared | FIAT-IVECO 8065.04.207 | FIAT-IVECO 8065.02.217 | differs |
| Displacement declared | 5.50 L | 5.18 L | +6% 1000 Super (TD) |
| Maximum torque declared | 268 lb·ft · 364 N·m | 237 lb·ft · 321 N·m | +13% 1000 Super (TD) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | dry Ferodo or Luk double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.4 gpm · 31.8 L/min | — |
| Pressure declared | 2,843 psi · 196 bar | 3,263 psi · 225 bar | +15% 980 (TD) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,981 lb · 3,620 kg | 8,320 lb · 3,774 kg | — |
| Maximum permissible mass declared | 14,065 lb · 6,380 kg | — | — |
| Wheelbase declared | 97.6 in · 2,480 mm | 101.2 in · 2,570 mm | — |
| Length declared | 164.6 in · 4,180 mm | 152.2 in · 3,865 mm | +8% 1000 Super (TD) |
| Width declared | 76.0 in · 1,930 mm | 76.0–103.5 in · 1,930–2,630 mm | differs |
| Ground clearance declared | 22.8 in · 580 mm | 22.0 in · 560 mm | — |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 12.6 ft · 3.83 m | — |
| Fuel tank declared | 124.7 qt · 118.0 L | 161.7 qt · 153.0 L | +30% 980 (TD) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 1000 Super (TD) sources
- Source: Traktorenlexikon, “Fiat 1000-S/1000-S DT”
- Source: Traktorenlexikon, “Someca 1000 S”
SOMECA 980 (TD) sources
- Source: Traktorenlexikon, “Someca 980”
- Source: Traktorenlexikon, “Fiat 980 DT”