Fiat 1000 Super (TD) or J.I. Case 1031?
Which should you choose?
On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Fiat 1000 Super (TD) is ahead on forward gears, PTO speeds and drive.
- The Fiat 1000 Super (TD) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540 rpm.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1000 Super (TD) | 1031 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 67.7 kW (90.7 hp)Traktorenlexikon, “Fiat 1000-S/1000-S DT” | 69.4 kW (93.1 hp)Traktorenlexikon, “Case 1031” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1000 Super (TD) and the 1031. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1000 Super (TD) and the 1031. |
| Which pumps more oil for implements? | — | 45.4 L/min (12.0 gpm)Traktorenlexikon, “Case 1031” | No figureNo call on hydraulic flow: no figure on record for the 1000 Super (TD). |
| Which lifts more on the three-point hitch? | 3,200 kg (7,055 lb)Traktorenlexikon, “Fiat 1000-S/1000-S DT” | — | No figureNo call on three-point lift: no figure on record for the 1031. |
| Which is heavier, for traction? | 3,620 kg (7,981 lb)Traktorenlexikon, “Fiat 1000-S/1000-S DT” | 4,234 kg (9,334 lb)Traktorenlexikon, “Case 1031” | Ahead (a fact, not an advantage)The J.I. Case 1031 is 17% heavier (614 kg / 1,354 lb) than the Fiat 1000 Super (TD) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,380 kg (14,065 lb)Traktorenlexikon, “Fiat 1000-S/1000-S DT” | — | No figureNo call on maximum permissible mass: no figure on record for the 1031. |
| Which has the wider choice of gears? | 12 to 16Traktorenlexikon, “Fiat 1000-S/1000-S DT” | 8Traktorenlexikon, “Case 1031” | AheadThe Fiat 1000 Super (TD) has 50% more forward gears (4 gears) than the J.I. Case 1031 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1000 Super (TD) and the 1031. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Fiat 1000-S/1000-S DT” | 25 km/h (15.5 mph)Traktorenlexikon, “Case 1031” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Fiat 1000-S/1000-S DT” | 1000 rpmTraktorenlexikon, “Case 1031” | AheadThe Fiat 1000 Super (TD) offers 540 rpm at the PTO, which the J.I. Case 1031 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiat 1000-S/1000-S DT” | independentTraktorenlexikon, “Case 1031” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 1000-S/1000-S DT” | 2WDTraktorenlexikon, “Case 1031” | AheadThe Fiat 1000 Super (TD) is available with four-wheel drive; the J.I. Case 1031 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1976–1979 | 1966–1969 | Ahead (a fact, not an advantage)The Fiat 1000 Super (TD) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The J.I. Case 1031 is 17% heavier (614 kg / 1,354 lb) than the Fiat 1000 Super (TD) (both unladen weight, as stated by the source).
- The Fiat 1000 Super (TD) has 50% more forward gears (4 gears) than the J.I. Case 1031 (both forward gears, as stated by the source).
- The Fiat 1000 Super (TD) offers 540 rpm at the PTO, which the J.I. Case 1031 does not (as stated by the sources).
- The Fiat 1000 Super (TD) is available with four-wheel drive; the J.I. Case 1031 is two-wheel drive (as stated by the sources).
- The Fiat 1000 Super (TD) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources