10 material differences · fewer than 12
Tractor oneFiat 1000 Super (TD)1976–1979No measured PTO figureTractor twoInternational Harvester 32881981–1985No measured PTO figure
Which should you choose?
Read our verdict on the 1000 Super (TD) and the 3288 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 1000 Super (TD) | 3288 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 108.5 hp | 89.7 hp | +21% 1000 Super (TD) |
| Engine declared | FIAT-IVECO 8065.04.207 | INTERNATIONAL HARVESTER D-358 | differs |
| Displacement declared | 5.50 L | 5.87 L | +7% 3288 |
| Maximum torque declared | 268 lb·ft · 364 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 3288 |
| Clutch declared | — | Pedal operated ceramic clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 15.0 gpm · 56.8 L/min | — |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,981 lb · 3,620 kg | 11,759 lb · 5,334 kg | +47% 3288 |
| Maximum permissible mass declared | 14,065 lb · 6,380 kg | — | — |
| Wheelbase declared | 97.6 in · 2,480 mm | 104.8 in · 2,662 mm | +7% 3288 |
| Length declared | 164.6 in · 4,180 mm | 184.0 in · 4,674 mm | +12% 3288 |
| Width declared | 76.0 in · 1,930 mm | 102.0 in · 2,591 mm | +34% 3288 |
| Ground clearance declared | 22.8 in · 580 mm | 13.0 in · 330 mm | +76% 1000 Super (TD) |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 11.9 ft · 3.63 m | +10% 1000 Super (TD) |
| Fuel tank declared | 124.7 qt · 118.0 L | 200.0 qt · 189.3 L | +60% 3288 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 1000 Super (TD) sources
- Source: Traktorenlexikon, “Fiat 1000-S/1000-S DT”
- Source: Traktorenlexikon, “Someca 1000 S”
International Harvester 3288 sources
- Source: Traktorenlexikon, “IHC 3288”
- Source: Traktorenlexikon, “IHC 786”