Fiat 1000 Super (DT) or SOMECA 980 (TD)?
Which should you choose?
On performance, every comparable figure that differs favours the SOMECA 980 (TD): three-point lift.
- The SOMECA 980 (TD) suits loader and hydraulic implement work better on this data: 12% (350 kg / 772 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1000 Super (DT) | 980 (TD) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 67.7 kW (91 hp)Traktorenlexikon, “Fiat 1000 (DT) Super” | 68.0 kW (91.1 hp)Traktorenlexikon, “Someca 980” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1000 Super (DT) and the 980 (TD). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1000 Super (DT) and the 980 (TD). |
| Which pumps more oil for implements? | 31.0 L/min (8.2 gpm)Traktorenlexikon, “Fiat 1000 (DT) Super” | 31.8 L/min (8.4 gpm)Traktorenlexikon, “Someca 980” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 3,000 kg (6,614 lb)Traktorenlexikon, “Fiat 1000 (DT) Super” | 3,350 kg (7,385 lb)Traktorenlexikon, “Someca 980” | AheadThe SOMECA 980 (TD) has 12% more lift (350 kg / 772 lb) than the Fiat 1000 Super (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,620 kg (7,981 lb)Traktorenlexikon, “Fiat 1000 (DT) Super” | 3,774 kg (8,320 lb)Traktorenlexikon, “Someca 980” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 6,380 kg (14,065 lb)Traktorenlexikon, “Fiat 1000 (DT) Super” | — | No figureNo call on maximum permissible mass: no figure on record for the 980 (TD). |
| Which has the wider choice of gears? | 12 to 16Traktorenlexikon, “Fiat 1000 (DT) Super” | 12 to 16Traktorenlexikon, “Someca 980” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1000 Super (DT) and the 980 (TD). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 1000 (DT) Super” | 25 km/h (15.5 mph)Traktorenlexikon, “Someca 980” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Fiat 1000 (DT) Super” | 540/1000 rpmTraktorenlexikon, “Someca 980” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Someca 980” | No figureNo call on PTO independence: not stated for the 1000 Super (DT). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 1000 (DT) Super” | Two-wheel or four-wheel driveTraktorenlexikon, “Someca 980” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1976–1979 | 1979–1983 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The SOMECA 980 (TD) has 12% more lift (350 kg / 772 lb) than the Fiat 1000 Super (DT) (both lift at the hitch ends, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources