12 material differences
Tractor oneFiat 1000 Super (DT)1976–1979No measured PTO figureTractor twoInternational Harvester 32881981–1985No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (47%); they were not built in overlapping years (1976–1979; 1981–1985). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
12 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 1000 Super (DT) | 3288 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 109 hp | 89.7 hp | +21% 1000 Super (DT) |
| Engine declared | Fiat 8065.04.207 | INTERNATIONAL HARVESTER D-358 | differs |
| Displacement declared | 5.50 L | 5.87 L | +7% 3288 |
| Maximum torque declared | 269 lb·ft · 365 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry Ferodo double clutch with separate PTO clutch | Pedal operated ceramic clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.2 gpm · 31.0 L/min | 15.0 gpm · 56.8 L/min | +83% 3288 |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,981 lb · 3,620 kg | 11,759 lb · 5,334 kg | +47% 3288 |
| Maximum permissible mass declared | 14,065 lb · 6,380 kg | — | — |
| Wheelbase declared | 97.6 in · 2,480 mm | 104.8 in · 2,662 mm | +7% 3288 |
| Length declared | 164.6 in · 4,180 mm | 184.0 in · 4,674 mm | +12% 3288 |
| Width declared | 79.1–98.8 in · 2,010–2,510 mm | 102.0 in · 2,591 mm | differs |
| Ground clearance declared | 22.8 in · 580 mm | 13.0 in · 330 mm | +76% 1000 Super (DT) |
| Turning radius, braked declared | 14.3 ft · 4.35 m | 11.9 ft · 3.63 m | +20% 1000 Super (DT) |
| Fuel tank declared | 121.5 qt · 115.0 L | 200.0 qt · 189.3 L | +65% 3288 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 1000 Super (DT) sources
- Source: Traktorenlexikon, “Fiat 1000 (DT) Super”
International Harvester 3288 sources
- Source: Traktorenlexikon, “IHC 3288”
- Source: Traktorenlexikon, “IHC 786”