Fiat 1000 (DT) vs International Harvester 1055 XL

13 material differences

Tractor one

Fiat 1000 (DT)

1972–1976

No measured PTO figure

Tractor two

International Harvester 1055 XL

1981–1982

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1972–1976; 1981–1982). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

13 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 1000 (DT) and International Harvester 1055 XL, field by field
Field1000 (DT)1055 XLGap
Engine
Engine power, claimed claimed98.7 hp98.6 hp
Engine declaredFIAT-IVECO 8065.02.007IH D-358differs
Displacement declared5.18 L5.87 L+13% 1055 XL
Maximum torque declared226 lb·ft · 306 N·m279 lb·ft · 378 N·m+24% 1055 XL
Transmission
Top speed declared18.6 mph · 30 km/h15.5–18.6 mph · 25–30 km/hdiffers
Clutch declaredDry FERODO double clutch with separate PTO control
Hydraulics & hitch
Hydraulic centre declaredOpen centre
Pump flow declared12.3 gpm · 46.5 L/min9.5 gpm · 36.0 L/min+29% 1000 (DT)
Pressure declared2,901 psi · 200 bar2,466 psi · 170 bar+18% 1000 (DT)
Three-point lift at ends declared5,975 lb · 2,710 kg
Rear PTO speeds declared540/1000 rpm540/1000 rpm
Weight & dimensions
Unladen weight declared7,771 lb · 3,525 kg9,634 lb · 4,370 kg+24% 1055 XL
Wheelbase declared97.6 in · 2,480 mm103.5 in · 2,630 mm+6% 1055 XL
Length declared164.6 in · 4,180 mm165.1 in · 4,194 mm
Width declared79.1 in · 2,010 mm90.8 in · 2,306 mm+15% 1055 XL
Height declared102.4 in · 2,600 mm109.1 in · 2,770 mm+7% 1055 XL
Ground clearance declared22.8 in · 580 mm20.2 in · 512 mm+13% 1000 (DT)
Turning radius, braked declared12.5 ft · 3.81 m14.4 ft · 4.40 m+15% 1055 XL
Fuel tank declared124.7 qt · 118.0 L147.9 qt · 140 L+19% 1055 XL

Fiat 1000 (DT) sources

Source
  • Source: Traktorenlexikon, “Fiat 1000/1000 DT”

International Harvester 1055 XL sources

Source
  • Source: Traktorenlexikon, “IHC 1055 XL”