Fiat 100-90 (DT) vs Massey Ferguson MF 3090 (A)

8 material differences · fewer than 12

Tractor one

1984–1992

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 100-90 (DT) and the MF 3090 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Fiat 100-90 (DT) and Massey Ferguson MF 3090 (A), field by field
Field	100-90 (DT)	MF 3090 (A)	Gap
Engine
Engine power, claimed claimed	98.7 hp	105.7 hp	+7% MF 3090 (A)
Engine declared	FIAT-IVECO 8065.06.200 or 300	Perkins A 6.354-4 TW	differs
Displacement declared	5.42 L	5.80 L	+7% MF 3090 (A)
Maximum torque declared	226 lb·ft · 306 N·m	289 lb·ft · 392 N·m	+28% MF 3090 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry and air-cooled VALEO single-plate clutch	—
Hydraulics & hitch
Pump flow declared	—	13.5 gpm · 51.2 L/min	—
Pressure declared	3,046–3,118 psi · 210–215 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift at ends declared	6,349 lb · 2,880 kg	8,543 lb · 3,875 kg	+35% MF 3090 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,962 lb · 4,065 kg	9,237 lb · 4,190 kg	—
Maximum permissible mass declared	13,448 lb · 6,100 kg	15,432 lb · 7,000 kg	+15% MF 3090 (A)
Wheelbase declared	102.1 in · 2,594 mm	106.1 in · 2,696 mm	—
Length declared	178.9 in · 4,544 mm	170.2 in · 4,323 mm	—
Width declared	77.6 in · 1,970 mm	74.8 in · 1,899 mm	—
Height declared	103.9 in · 2,640 mm	109.2 in · 2,774 mm	—
Ground clearance declared	22.0 in · 560 mm	18.0 in · 457 mm	+23% 100-90 (DT)
Turning radius, braked declared	12.5 ft · 3.82 m	—	—
Fuel tank declared	98.3 qt · 93.0 L	200.8 qt · 190.0 L	+104% MF 3090 (A)

Source

Source