Fiat 100-90 (DT) vs John Deere 3350 (A)

10 material differences · fewer than 12

Tractor one

1984–1992

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 100-90 (DT) and the 3350 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 100-90 (DT) and John Deere 3350 (A), field by field
Field	100-90 (DT)	3350 (A)	Gap
Engine
Engine power, claimed claimed	98.7 hp	98.7 hp	—
Engine declared	FIAT-IVECO 8065.06.200 or 300	John Deere 6.359 DL-009	differs
Displacement declared	5.42 L	5.88 L	+9% 3350 (A)
Maximum torque declared	226 lb·ft · 306 N·m	292 lb·ft · 396 N·m	+29% 3350 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry LuK single-plate clutch as drive clutch	—
Hydraulics & hitch
Pump flow declared	—	13.8 gpm · 52.3 L/min	—
Pressure declared	3,046–3,118 psi · 210–215 bar	3,336 psi · 230 bar	differs
Three-point lift at ends declared	6,349 lb · 2,880 kg	8,498 lb · 3,855 kg	+34% 3350 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,962 lb · 4,065 kg	9,315 lb · 4,225 kg	—
Maximum permissible mass declared	13,448 lb · 6,100 kg	14,771 lb · 6,700 kg	+10% 3350 (A)
Wheelbase declared	102.1 in · 2,594 mm	100.4 in · 2,551 mm	—
Length declared	178.9 in · 4,544 mm	175.8 in · 4,465 mm	—
Width declared	77.6 in · 1,970 mm	88.5 in · 2,249 mm	+14% 3350 (A)
Height declared	103.9 in · 2,640 mm	111.4 in · 2,830 mm	+7% 3350 (A)
Ground clearance declared	22.0 in · 560 mm	25.6 in · 650 mm	+16% 3350 (A)
Turning radius, braked declared	12.5 ft · 3.82 m	—	—
Fuel tank declared	98.3 qt · 93.0 L	127.9–182.8 qt · 121.0–173.0 L	differs

Source

Source