Fiat 100-90 (DT) vs International Harvester 3288

9 material differences · fewer than 12

Tractor one

1984–1992

No measured PTO figure

Tractor two

1981–1985

No measured PTO figure

Which should you choose?

Read our verdict on the 100-90 (DT) and the 3288 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 100-90 (DT) and International Harvester 3288, field by field
Field	100-90 (DT)	3288	Gap
Engine
Engine power, claimed claimed	98.7 hp	89.7 hp	+10% 100-90 (DT)
Engine declared	FIAT-IVECO 8065.06.200 or 300	INTERNATIONAL HARVESTER D-358	differs
Displacement declared	5.42 L	5.87 L	+8% 3288
Maximum torque declared	226 lb·ft · 306 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal operated ceramic clutch	—
Hydraulics & hitch
Pump flow declared	—	15.0 gpm · 56.8 L/min	—
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	6,349 lb · 2,880 kg	6,704 lb · 3,041 kg	+6% 3288
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,962 lb · 4,065 kg	11,759 lb · 5,334 kg	+31% 3288
Maximum permissible mass declared	13,448 lb · 6,100 kg	—	—
Wheelbase declared	102.1 in · 2,594 mm	104.8 in · 2,662 mm	—
Length declared	178.9 in · 4,544 mm	184.0 in · 4,674 mm	—
Width declared	77.6 in · 1,970 mm	102.0 in · 2,591 mm	+32% 3288
Height declared	103.9 in · 2,640 mm	112.0 in · 2,845 mm	+8% 3288
Ground clearance declared	22.0 in · 560 mm	13.0 in · 330 mm	+70% 100-90 (DT)
Turning radius, braked declared	12.5 ft · 3.82 m	11.9 ft · 3.63 m	—
Fuel tank declared	98.3 qt · 93.0 L	200.0 qt · 189.3 L	+104% 3288

Source

Source