10 material differences · fewer than 12
Tractor oneFendt Xylon 3201990No measured PTO figureTractor twoJohn Deere 7400 (A)1993–1997No measured PTO figure
Which should you choose?
Read our verdict on the Xylon 320 and the 7400 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Xylon 320 | 7400 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 118.4 hp | — |
| Engine declared | Deutz F6L 912 H | John Deere 6.068 TRW-02 | differs |
| Displacement declared | 6.13 L | 6.79 L | +11% 7400 (A) |
| Maximum torque declared | 287 lb·ft · 389 N·m | 350 lb·ft · 474 N·m | +22% 7400 (A) |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 25.9 gpm · 98.0 L/min | — |
| Pressure declared | — | 2,538 psi · 175 bar | — |
| Rear PTO speeds declared | 540/750/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,081 lb · 5,480 kg | 12,663 lb · 5,744 kg | — |
| Maximum permissible mass declared | — | 19,842 lb · 9,000 kg | — |
| Wheelbase declared | 115.2 in · 2,925 mm | 103.3 in · 2,625 mm | +11% Xylon 320 |
| Length declared | 189.6 in · 4,816 mm | 174.6 in · 4,435 mm | +9% Xylon 320 |
| Width declared | 90.4 in · 2,295 mm | 110.6–120.3 in · 2,808–3,056 mm | differs |
| Ground clearance declared | 25.6 in · 650 mm | 14.2 in · 360 mm | +81% Xylon 320 |
| Turning radius, braked declared | 19.0 ft · 5.80 m | — | — |
| Fuel tank declared | 253.6 qt · 240 L | 215.6 qt · 204.0 L | +18% Xylon 320 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Xylon 320 sources
- Source: Traktorenlexikon, “Fendt Xylon 320”
John Deere 7400 (A) sources
- Source: Traktorenlexikon, “John Deere 7400”