7 material differences · fewer than 12
Tractor oneFendt Fix 161961–1963No measured PTO figureTractor twoGüldner A 151949–1950No measured PTO figure
Which should you choose?
Read our verdict on the Fix 16 and the A 15 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Fix 16 | A 15 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 15.7 hp | 15.7 hp | — |
| Engine declared | MWM KD 211 Z | Güldner D 215 or 2 D 15 | differs |
| Displacement declared | 1.25 L | 1.30 L | — |
| Maximum torque declared | — | 51 lb·ft · 69 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 10.0 mph · 16.1 km/h | +24% Fix 16 |
| Clutch declared | Single plate dry clutch | Pedal-operated dry single-plate clutch from Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 2.9 gpm · 11.0 L/min | — | — |
| Pressure declared | 2,134 psi · 147 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,789 lb · 1,265 kg | 2,701 lb · 1,225 kg | — |
| Maximum permissible mass declared | 4,189 lb · 1,900 kg | — | — |
| Wheelbase declared | 68.9 in · 1,750 mm | 61.0 in · 1,550 mm | +13% Fix 16 |
| Length declared | 113.8 in · 2,890 mm | 102.4 in · 2,600 mm | +11% Fix 16 |
| Width declared | 59.8 in · 1,520 mm | 59.4 in · 1,510 mm | — |
| Ground clearance declared | 15.7 in · 400 mm | 13.0 in · 330 mm | +21% Fix 16 |
| Fuel tank declared | 31.7 qt · 30 L | 21.1 qt · 20 L | +50% Fix 16 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Fix 16 sources
Source
- Source: Traktorenlexikon, “Fendt Fix 16”
- Source: Traktorenlexikon, “Kramer K 15”
Güldner A 15 sources
Source
- Source: Traktorenlexikon, “Güldner A 15”