9 material differences · fewer than 12
Tractor oneFendt Favorit 824 LSE1993–2004No measured PTO figureTractor twoJohn Deere 49601992–1994No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 824 LSE and the 4960 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Favorit 824 LSE | 4960 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 227 hp | 227.0 hp | — |
| Engine declared | MAN D 0826 LE 523 | John Deere 6.076 ARW-03 | differs |
| Displacement declared | 6.87 L | 7.63 L | +11% 4960 |
| Maximum torque declared | 698 lb·ft · 947 N·m | 670 lb·ft · 908 N·m | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 18.6 mph · 30 km/h | +67% Favorit 824 LSE |
| Clutch declared | wet multi-plate driving clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 26.9 gpm · 102.0 L/min | 30.6 gpm · 115.8 L/min | +14% 4960 |
| Pressure declared | — | 3,002 psi · 207 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,196–18,188 lb · 7,800–8,250 kg | 18,369 lb · 8,332 kg | differs |
| Maximum permissible mass declared | 26,455 lb · 12,000 kg | — | — |
| Wheelbase declared | 111.8 in · 2,840 mm | 116.9 in · 2,970 mm | — |
| Length declared | 194.5 in · 4,940 mm | 213.4 in · 5,420 mm | +10% 4960 |
| Width declared | 102.0 in · 2,590 mm | 118.0 in · 2,997 mm | +16% 4960 |
| Ground clearance declared | 23.8 in · 605 mm | 16.5 in · 420 mm | +44% Favorit 824 LSE |
| Turning radius, braked declared | 17.7 ft · 5.40 m | — | — |
| Fuel tank declared | 391.0 qt · 370 L | 407.9 qt · 386.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 824 LSE sources
- Source: Traktorenlexikon, “Fendt Favorit 824”
John Deere 4960 sources
- Source: Traktorenlexikon, “John Deere 4960”