11 material differences · fewer than 12

Tractor oneFendt Favorit 8181993–2002No measured PTO figureTractor twoSchlüter Euro Trac 1900/2000 LS1991–1995No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 818 and the Euro Trac 1900/2000 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fendt Favorit 818 and Schlüter Euro Trac 1900/2000 LS, field by field
FieldFavorit 818Euro Trac 1900/2000 LSGap
Engine
Engine power, claimed claimed188 hp188 hp—
Engine declaredMAN D 0826 LE 521MAN D 0826 LUE 501differs
Displacement declared6.87 L6.87 L—
Maximum torque declared596 lb·ft · 808 N·m——
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h21.4 mph · 34.5 km/hdiffers
Clutch declaredWet multi-plate clutch as driving clutchWet multi-plate clutchdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensing——
Pump flow declared26.9 gpm · 102.0 L/min14.5 gpm · 54.9 L/min+86% Favorit 818
Pressure declared2,901 psi · 200 bar——
Rear PTO speeds declared750/1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared16,932 lb · 7,680 kg15,212–15,653 lb · 6,900–7,100 kgdiffers
Maximum permissible mass declared26,455 lb · 12,000 kg——
Wheelbase declared111.8 in · 2,840 mm124.8 in · 3,170 mm+12% Euro Trac 1900/2000 LS
Length declared194.5 in · 4,940 mm211.0 in · 5,360 mm+9% Euro Trac 1900/2000 LS
Width declared100.4 in · 2,550 mm98.4 in · 2,500 mm—
Ground clearance declared23.8 in · 605 mm21.7 in · 550 mm+10% Favorit 818
Turning radius, braked declared17.7 ft · 5.40 m13.0 ft · 3.95 m+37% Favorit 818
Fuel tank declared391.0 qt · 370 L306.4 qt · 290 L+28% Favorit 818

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 818 sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 818”

Schlüter Euro Trac 1900/2000 LS sources

Source
  • Source: Traktorenlexikon, “Schlüter Euro Trac 1900/2000 LS”