15 material differences

Tractor oneFendt Favorit 8181993–2002No measured PTO figureTractor twoFiat G 1901993–2002No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 818 and the G 190 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

15 material differences · 1 fields identical or within 5%, which is not counted as material

Fendt Favorit 818 and Fiat G 190, field by field
FieldFavorit 818G 190Gap
Engine
Engine power, claimed claimed188 hp187.5 hp—
Engine declaredMAN D 0826 LE 521New Holland TA 456 CID/TCdiffers
Displacement declared6.87 L7.49 L+9% G 190
Maximum torque declared596 lb·ft · 808 N·m632 lb·ft · 857 N·m+6% G 190
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredWet multi-plate clutch as driving clutchElectro-hydraulically operated wet Funk multi-disc clutchdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensing——
Pump flow declared26.9 gpm · 102.0 L/min33.3 gpm · 126.1 L/min+24% G 190
Pressure declared2,901 psi · 200 bar2,495 psi · 172 bar+16% Favorit 818
Rear PTO speeds declared750/1000 rpm1000 rpmdiffers
Weight & dimensions
Unladen weight declared16,932 lb · 7,680 kg19,286 lb · 8,748 kg+14% G 190
Maximum permissible mass declared26,455 lb · 12,000 kg30,865 lb · 14,000 kg+17% G 190
Wheelbase declared111.8 in · 2,840 mm122.6 in · 3,115 mm+10% G 190
Length declared194.5 in · 4,940 mm213.6 in · 5,426 mm+10% G 190
Width declared100.4 in · 2,550 mm112.0 in · 2,845 mm+12% G 190
Ground clearance declared23.8 in · 605 mm20.0 in · 507 mm+19% Favorit 818
Turning radius, braked declared17.7 ft · 5.40 m——
Fuel tank declared391.0 qt · 370 L439.6 qt · 416.0 L+12% G 190

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 818 sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 818”

Fiat G 190 sources

Source
  • Source: Traktorenlexikon, “Fiatagri G190”