13 material differences
Tractor oneFendt Favorit 714 Variofrom 1998No measured PTO figureTractor twoVALMET 8450 HiTech1998–2003No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 714 Vario and the 8450 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | Favorit 714 Vario | 8450 HiTech | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 138 hp | 138 hp | — |
| Engine declared | Deutz BF6M 2013 C | VALMET 620 DWRE | differs |
| Displacement declared | 5.70 L | 6.59 L | +16% 8450 HiTech |
| Maximum torque declared | — | 454 lb·ft · 615 N·m | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Multi-disc clutch | Pedal-operated, dry FICHTEL & SACHS single-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 29.3 gpm · 111.0 L/min | 19.4 gpm · 73.6 L/min | +51% Favorit 714 Vario |
| Pressure declared | 2,683 psi · 185 bar | 3,046 psi · 210 bar | +14% 8450 HiTech |
| Rear PTO speeds declared | 540/750/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,677–14,451 lb · 5,750–6,555 kg | 11,707 lb · 5,310 kg | differs |
| Maximum permissible mass declared | 24,251 lb · 11,000 kg | 18,739 lb · 8,500 kg | +29% Favorit 714 Vario |
| Wheelbase declared | 106.3 in · 2,700 mm | 100.7 in · 2,558 mm | +6% Favorit 714 Vario |
| Length declared | 182.7–183.2 in · 4,640–4,653 mm | 194.4 in · 4,937 mm | differs |
| Width declared | 100.4–102.0 in · 2,550–2,590 mm | 92.7 in · 2,355 mm | differs |
| Ground clearance declared | 22.7 in · 576 mm | 20.3 in · 515 mm | +12% Favorit 714 Vario |
| Turning radius, braked declared | 16.1 ft · 4.90 m | — | — |
| Fuel tank declared | — | 174.4 qt · 165.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 714 Vario sources
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”
VALMET 8450 HiTech sources
- Source: Traktorenlexikon, “Valmet Mega-8450 HiTech”