13 material differences

Tractor oneFendt Favorit 712 Variofrom 1999No measured PTO figureTractor twoNew Holland TM 135 (Traktorenlexikon)1999–2002No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 712 Vario and the TM 135 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 3 fields identical or within 5%, which is not counted as material

Fendt Favorit 712 Vario and New Holland TM 135 (Traktorenlexikon), field by field
FieldFavorit 712 VarioTM 135Gap
Engine
Engine power, claimed claimed122.7 hp123.2 hp—
Engine declaredDeutz BF6M 2013 CNEW HOLLAND 675-T/WTdiffers
Displacement declared5.70 L7.48 L+31% TM 135
Maximum torque declared453 lb·ft · 613.8 N·m393 lb·ft · 533 N·m+15% Favorit 712 Vario
Transmission
Top speed declared31.1 mph · 50 km/h24.9 mph · 40 km/h+25% Favorit 712 Vario
Clutch declaredMulti-disc clutch——
Hydraulics & hitch
Hydraulic centre declaredClosed centre——
Pump flow declared20.7 gpm · 78.5 L/min31.3 gpm · 118.5 L/min+51% TM 135
Pressure declared2,466 psi · 170 bar2,799 psi · 193 bar+14% TM 135
Rear PTO speeds declared540/750/1000 rpm540/540E/1000 rpmdiffers
Weight & dimensions
Unladen weight declared12,566–13,603 lb · 5,700–6,170 kg13,517 lb · 6,131 kgdiffers
Maximum permissible mass declared20,944 lb · 9,500 kg19,842 lb · 9,000 kg+6% Favorit 712 Vario
Wheelbase declared106.3 in · 2,700 mm107.2 in · 2,723 mm—
Length declared181.7–182.7 in · 4,615–4,640 mm185.2 in · 4,705 mm—
Width declared94.1–95.6 in · 2,390–2,429 mm86.0–109.6 in · 2,184–2,784 mmdiffers
Ground clearance declared20.8 in · 528 mm15.4 in · 390 mm+35% Favorit 712 Vario
Turning radius, braked declared16.1 ft · 4.90 m18.1 ft · 5.52 m+13% TM 135
Fuel tank declared317.0 qt · 300 L343.4 qt · 325.0 L+8% TM 135

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 712 Vario sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 712 Vario”
  • Source: Traktorenlexikon, “Fendt Favorit 714 Vario”
  • Source: OECD test report 1943, 2000

New Holland TM 135 (Traktorenlexikon) sources

Source
  • Source: Traktorenlexikon, “New Holland TM135”