12 material differences

Tractor oneFendt Favorit 711 Variofrom 1999No measured PTO figureTractor twoNew Holland TM 125 (Traktorenlexikon)1999–2002No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 711 Vario and the TM 125 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 3 fields identical or within 5%, which is not counted as material

Fendt Favorit 711 Vario and New Holland TM 125 (Traktorenlexikon), field by field
FieldFavorit 711 VarioTM 125Gap
Engine
Engine power, claimed claimed113.7 hp113.5 hp—
Engine declaredDeutz BF6M 2013 CNEW HOLLAND 675-T/WSdiffers
Displacement declared5.70 L7.48 L+31% TM 125
Maximum torque declared—372 lb·ft · 504 N·m—
Transmission
Top speed declared31.1 mph · 50 km/h24.9 mph · 40 km/h+25% Favorit 711 Vario
Hydraulics & hitch
Hydraulic control declaredLoad sensing——
Pump flow declared29.1 gpm · 110.0 L/min30.9 gpm · 116.9 L/min+6% TM 125
Pressure declared2,901 psi · 200 bar2,466 psi · 170 bar+18% Favorit 711 Vario
Rear PTO speeds declared540 rpm / 750 rpm / 1000 rpm540/540E/1000 rpmdiffers
Weight & dimensions
Unladen weight declared12,456–13,603 lb · 5,650–6,170 kg11,766 lb · 5,337 kgdiffers
Maximum permissible mass declared20,944 lb · 9,500 kg18,739 lb · 8,500 kg+12% Favorit 711 Vario
Wheelbase declared106.3 in · 2,700 mm107.2 in · 2,723 mm—
Length declared181.7–182.7 in · 4,615–4,640 mm184.1 in · 4,675 mm—
Width declared94.1–95.6 in · 2,390–2,429 mm84.6–108.3 in · 2,150–2,752 mmdiffers
Ground clearance declared20.8 in · 528 mm14.4 in · 365 mm+45% Favorit 711 Vario
Turning radius, braked declared16.1 ft · 4.90 m14.8 ft · 4.52 m+8% Favorit 711 Vario
Fuel tank declared317.0 qt · 300 L343.4 qt · 325.0 L+8% TM 125

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 711 Vario sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 711 Vario”
  • Source: Traktorenlexikon, “Fendt Favorit 714 Vario”

New Holland TM 125 (Traktorenlexikon) sources

Source
  • Source: Traktorenlexikon, “New Holland TM125”