Fendt Favorit 626 LS (FWA 292) or Massey Ferguson MF 4840?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Favorit 626 LS (FWA 292) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 4840 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt Favorit 626 LS (FWA 292) suits road haulage better on this data: 26% (8.1 km/h / 5.0 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt Favorit 626 LS (FWA 292) and Massey Ferguson MF 4840, with the call on each
QuestionFavorit 626 LS (FWA 292)MF 4840Call
Which puts more power through the PTO shaft?185 kW (248 hp)Traktorenlexikon, “Fendt Favorit 626 LS/LSA”191.5 kW (256.8 hp)Traktorenlexikon, “Massey Ferguson MF 4840”Not comparableNot comparable on power at the PTO shaft: the Favorit 626 LS (FWA 292) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 4840 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Favorit 626 LS (FWA 292) and the MF 4840.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Favorit 626 LS (FWA 292) and the MF 4840.
Which pumps more oil for implements?56 L/min (14.8 gpm)Traktorenlexikon, “Fendt Favorit 626 LS/LSA”No figureNo call on hydraulic flow: no figure on record for the MF 4840.
Which lifts more on the three-point hitch?8,260 kg (18,210 lb)Traktorenlexikon, “Fendt Favorit 626 LS/LSA”4,983 kg (10,986 lb)Traktorenlexikon, “Massey Ferguson MF 4840”EvenNo call on three-point lift: the sources do not state where the lift was measured, so the difference is not a reliable call.
Which is heavier, for traction?9,565 kg (21,087 lb)Traktorenlexikon, “Fendt Favorit 626 LS/LSA”11,820 kg (26,059 lb)Traktorenlexikon, “Massey Ferguson MF 4840”Ahead (a fact, not an advantage)The Massey Ferguson MF 4840 is 24% heavier (2,255 kg / 4,971 lb) than the Fendt Favorit 626 LS (FWA 292) (both unladen weight, as stated by the source).
Which may carry more ballast and load?11,550 kg (25,463 lb) to 14,000 kg (30,865 lb)Traktorenlexikon, “Fendt Favorit 626 LS/LSA”No figureNo call on maximum permissible mass: no figure on record for the MF 4840.
Which has the wider choice of gears?18Traktorenlexikon, “Massey Ferguson MF 4840”No figureNo call on forward gears: no figure on record for the Favorit 626 LS (FWA 292).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Favorit 626 LS (FWA 292) and the MF 4840.
Which is faster on the road?39 km/h (24.2 mph)Traktorenlexikon, “Fendt Favorit 626 LS/LSA”30.9 km/h (19.2 mph)Traktorenlexikon, “Massey Ferguson MF 4840”AheadThe Fendt Favorit 626 LS (FWA 292) has 26% more top speed (8.1 km/h / 5.0 mph) than the Massey Ferguson MF 4840 (both top speed forward, as stated by the source).
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Fendt Favorit 626 LS/LSA”1000 rpmTraktorenlexikon, “Massey Ferguson MF 4840”EvenEven on PTO speeds: the same speeds (1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the Favorit 626 LS (FWA 292) and the MF 4840.
Which drives on both axles?4WDTraktorenlexikon, “Fendt Favorit 626 LS/LSA”4WDTraktorenlexikon, “Massey Ferguson MF 4840”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1981–19851978–1986EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 4840 is 24% heavier (2,255 kg / 4,971 lb) than the Fendt Favorit 626 LS (FWA 292) (both unladen weight, as stated by the source).
  • The Fendt Favorit 626 LS (FWA 292) has 26% more top speed (8.1 km/h / 5.0 mph) than the Massey Ferguson MF 4840 (both top speed forward, as stated by the source).
  • No call on three-point lift: the sources do not state where the lift was measured, so the difference is not a reliable call.
  • Even on PTO speeds: the same speeds (1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Favorit 626 LS (FWA 292) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 4840 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, forward gears, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources