6 material differences · fewer than 12
Tractor oneFendt Favorit 614 LSA1983–1993No measured PTO figureTractor twoFord 87301989–1994No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 614 LSA and the 8730 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Favorit 614 LSA | 8730 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 152.2 hp | 151.9 hp | — |
| Engine declared | MWM TD 226.6.2 | Ford 401 | differs |
| Displacement declared | 6.24 L | 6.58 L | +5% 8730 |
| Maximum torque declared | — | 387 lb·ft · 525 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6 mph · 30 km/h | +33% Favorit 614 LSA |
| Clutch declared | Fichtel & Sachs, type GMFZ 360 | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 28.3 gpm · 107.1 L/min | — |
| Pressure declared | — | 2,045 psi · 141 bar | — |
| Rear PTO speeds declared | — | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 14,396–14,914 lb · 6,530–6,765 kg | 14,859 lb · 6,740 kg | — |
| Maximum permissible mass declared | — | 25,133 lb · 11,400 kg | — |
| Wheelbase declared | 105.9 in · 2,690 mm | 110.8 in · 2,814 mm | — |
| Length declared | 178.7–185.8 in · 4,540–4,719 mm | 193.4 in · 4,913 mm | differs |
| Width declared | 93.7 in · 2,380 mm | 104.5–137.4 in · 2,655–3,490 mm | differs |
| Ground clearance declared | 18.5 in · 470 mm | 18.2 in · 462 mm | — |
| Turning radius, braked declared | 19.4 ft · 5.90 m | — | — |
| Fuel tank declared | 234.6 qt · 222 L | 400.5 qt · 379.0 L | +71% 8730 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 614 LSA sources
- Source: Traktorenlexikon, “Fendt Favorit 614 LSA”
- Source: Traktorenlexikon, “Fendt Favorit 612 LSA”
Ford 8730 sources
- Source: Traktorenlexikon, “Ford 8730”