7 material differences · fewer than 12
Tractor oneFendt Favorit 612 SA1974No measured PTO figureTractor twoURSUS 1.201 / 1.2041974–1993No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 612 SA and the 1.201 / 1.204 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Favorit 612 SA | 1.201 / 1.204 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 119 hp | — |
| Engine declared | MWM D 226-6 | T.S.-MARTIN Z-8601 | differs |
| Displacement declared | 6.23 L | 6.84 L | +10% 1.201 / 1.204 |
| Maximum torque declared | — | 263 lb·ft · 357 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Favorit 612 SA |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Hydraulic control declared | Constant flow | — | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,885 lb · 4,030 kg | 9,343 lb · 4,238 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 106.1 in · 2,696 mm | 106.1 in · 2,695 mm | — |
| Length declared | 172.5 in · 4,382 mm | 176.8 in · 4,490 mm | — |
| Width declared | 84.8 in · 2,154 mm | 78.3–87.2 in · 1,990–2,215 mm | differs |
| Ground clearance declared | 18.1 in · 460 mm | 16.5 in · 420 mm | +10% Favorit 612 SA |
| Turning radius, braked declared | 15.4 ft · 4.70 m | 14.4 ft · 4.38 m | +7% Favorit 612 SA |
| Fuel tank declared | 137.4 qt · 130 L | 137.4 qt · 130.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 612 SA sources
- Source: Traktorenlexikon, “Fendt Favorit 612 SA”
- Source: Traktorenlexikon, “Fendt Favorit 612 S”
URSUS 1.201 / 1.204 sources
- Source: Traktorenlexikon, “Ursus 1201/1204”