10 material differences · fewer than 12
Tractor oneFendt Favorit 612 SA1974No measured PTO figureTractor twoJ.I. Case 20901978–1983No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 612 SA and the 2090 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Favorit 612 SA | 2090 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 118.4 hp | — |
| Engine declared | MWM D 226-6 | CASE 504 BD | differs |
| Displacement declared | 6.23 L | 8.26 L | +32% 2090 |
| Maximum torque declared | — | 318 lb·ft · 431 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | — | Pedal-operated wet disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Constant flow | — | — |
| Pump flow declared | — | 21.0 gpm · 79.5 L/min | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,885 lb · 4,030 kg | 11,909–12,031 lb · 5,402–5,457 kg | differs |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 106.1 in · 2,696 mm | 104.0 in · 2,642 mm | — |
| Length declared | 172.5 in · 4,382 mm | 161.8 in · 4,110 mm | +7% Favorit 612 SA |
| Width declared | 84.8 in · 2,154 mm | 79.1–103.1 in · 2,010–2,620 mm | differs |
| Ground clearance declared | 18.1 in · 460 mm | 21.0 in · 533 mm | +16% 2090 |
| Turning radius, braked declared | 15.4 ft · 4.70 m | 11.8 ft · 3.61 m | +30% Favorit 612 SA |
| Fuel tank declared | 137.4 qt · 130 L | 259.9 qt · 246.0 L | +89% 2090 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 612 SA sources
- Source: Traktorenlexikon, “Fendt Favorit 612 SA”
- Source: Traktorenlexikon, “Fendt Favorit 612 S”
J.I. Case 2090 sources
- Source: Traktorenlexikon, “Case 2090”