Fendt 611 LS/LSA or J.I. Case 1031?
Which should you choose?
On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Fendt 611 LS/LSA is ahead on forward gears, top speed, PTO speeds and drive.
- The Fendt 611 LS/LSA suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540, 750 rpm.
- The Fendt 611 LS/LSA suits heavy draft work (ploughing, cultivating) better on this data: 23% (961 kg / 2,119 lb) heavier and four-wheel drive.
- The Fendt 611 LS/LSA suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 611 LS/LSA | 1031 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 68.5 kW (91.9 hp)Traktorenlexikon, “Fendt Favorit 611 LS” | 69.4 kW (93.1 hp)Traktorenlexikon, “Case 1031” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 611 LS/LSA and the 1031. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 611 LS/LSA and the 1031. |
| Which pumps more oil for implements? | 45.0 L/min (11.9 gpm)Traktorenlexikon, “Fendt Favorit 611 LS” | 45.4 L/min (12.0 gpm)Traktorenlexikon, “Case 1031” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 3,490 kg (7,694 lb)Traktorenlexikon, “Fendt Favorit 611 LS” | — | No figureNo call on three-point lift: no figure on record for the 1031. |
| Which is heavier, for traction? | 5,195 kg (11,453 lb)Traktorenlexikon, “Fendt Favorit 611 LS” | 4,234 kg (9,334 lb)Traktorenlexikon, “Case 1031” | Ahead (a fact, not an advantage)The Fendt 611 LS/LSA is 23% heavier (961 kg / 2,119 lb) than the J.I. Case 1031 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 611 LS/LSA and the 1031. |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Fendt Favorit 611 LS” | 8Traktorenlexikon, “Case 1031” | AheadThe Fendt 611 LS/LSA has 100% more forward gears (8 gears) than the J.I. Case 1031 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 611 LS/LSA and the 1031. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fendt Favorit 611 LS” | 25 km/h (15.5 mph)Traktorenlexikon, “Case 1031” | AheadThe Fendt 611 LS/LSA has 20% more top speed (5.0 km/h / 3.1 mph) than the J.I. Case 1031 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpm / 750 rpm / 1000 rpmTraktorenlexikon, “Fendt Favorit 611 LS” | 1000 rpmTraktorenlexikon, “Case 1031” | AheadThe Fendt 611 LS/LSA offers 540 and 750 rpm at the PTO, which the J.I. Case 1031 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Case 1031” | No figureNo call on PTO independence: not stated for the 611 LS/LSA. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fendt Favorit 611 LS” | 2WDTraktorenlexikon, “Case 1031” | AheadThe Fendt 611 LS/LSA is available with four-wheel drive; the J.I. Case 1031 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1977–1985 | 1966–1969 | Ahead (a fact, not an advantage)The Fendt 611 LS/LSA is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt 611 LS/LSA is 23% heavier (961 kg / 2,119 lb) than the J.I. Case 1031 (both unladen weight, as stated by the source).
- The Fendt 611 LS/LSA has 100% more forward gears (8 gears) than the J.I. Case 1031 (both forward gears, as stated by the source).
- The Fendt 611 LS/LSA has 20% more top speed (5.0 km/h / 3.1 mph) than the J.I. Case 1031 (both top speed forward, as stated by the source).
- The Fendt 611 LS/LSA offers 540 and 750 rpm at the PTO, which the J.I. Case 1031 does not (as stated by the sources).
- The Fendt 611 LS/LSA is available with four-wheel drive; the J.I. Case 1031 is two-wheel drive (as stated by the sources).
- The Fendt 611 LS/LSA is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources