7 material differences · fewer than 12
Tractor oneFendt Favorit 610 S1972–1976No measured PTO figureTractor twoJ.I. Case 9401962–1969No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 610 S and the 940 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Favorit 610 S | 940 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.4 hp | 83.0 hp | — |
| Engine declared | MWM D 225-6 | — | — |
| Displacement declared | 5.10 L | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Favorit 610 S |
| Clutch declared | Single-disc dry clutch | pedal-operated dry CASE single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Constant flow | — | — |
| Pump flow declared | 9.7 gpm · 36.8 L/min | 15.5 gpm · 58.7 L/min | +60% 940 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,499 lb · 3,855 kg | 8,852 lb · 4,015 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 106.1 in · 2,696 mm | 83.8 in · 2,129 mm | +27% Favorit 610 S |
| Length declared | 172.5 in · 4,382 mm | 141.0 in · 3,581 mm | +22% Favorit 610 S |
| Width declared | 84.8 in · 2,154 mm | 84.0 in · 2,134 mm | — |
| Ground clearance declared | 18.1 in · 460 mm | 17.5 in · 445 mm | — |
| Turning radius, braked declared | 13.8 ft · 4.21 m | 9.5 ft · 2.90 m | +45% Favorit 610 S |
| Fuel tank declared | 137.4 qt · 130 L | 95.9–120.0 qt · 90.8–113.6 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 610 S sources
- Source: Traktorenlexikon, “Fendt Favorit 610 S”
- Source: Traktorenlexikon, “Fendt Favorit 4 S/SA”
J.I. Case 940 sources
- Source: Traktorenlexikon, “Case 940”