10 material differences · fewer than 12

Tractor oneFendt Favorit 610 S1972–1976No measured PTO figureTractor twoHanomag Robust 900 A (S)1967–1969No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 610 S and the Robust 900 A (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

10 material differences · 3 fields identical or within 5%, which is not counted as material

Fendt Favorit 610 S and Hanomag Robust 900 A (S), field by field
FieldFavorit 610 SRobust 900 A (S)Gap
Engine
Engine power, claimed claimed83.4 hp83 hp—
Engine declaredMWM D 225-6Hanomag D162 R1differs
Displacement declared5.10 L4.71 L+8% Favorit 610 S
Maximum torque declared—195 lb·ft · 265 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h12.3–16.9 mph · 19.87–27.15 km/hdiffers
Clutch declaredSingle-disc dry clutchDual clutch for transmission and PTOdiffers
Hydraulics & hitch
Hydraulic control declaredConstant flow——
Pump flow declared9.7 gpm · 36.8 L/min——
Rear PTO speeds declared540/1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared8,499 lb · 3,855 kg7,055–8,223 lb · 3,200–3,730 kgdiffers
Maximum permissible mass declared14,330 lb · 6,500 kg——
Wheelbase declared106.1 in · 2,696 mm97.4–98.8 in · 2,475–2,510 mmdiffers
Length declared172.5 in · 4,382 mm157.1 in · 3,990 mm+10% Favorit 610 S
Width declared84.8 in · 2,154 mm79.3–84.6 in · 2,015–2,150 mmdiffers
Ground clearance declared18.1 in · 460 mm12.6 in · 320 mm+44% Favorit 610 S
Turning radius, braked declared13.8 ft · 4.21 m13.5 ft · 4.10 m—
Fuel tank declared137.4 qt · 130 L132.1 qt · 125 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 610 S sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 610 S”
  • Source: Traktorenlexikon, “Fendt Favorit 4 S/SA”

Hanomag Robust 900 A (S) sources

Source
  • Source: Traktorenlexikon, “Hanomag Robust 900 A (S)”