Fendt 515 C or Lamborghini Rubin 150?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 515 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Rubin 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fendt 515C suits loader and hydraulic implement work better on this data: 32% (22.5 L/min / 5.9 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 515 C | Rubin 150 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 110 kW (148 hp)Traktorenlexikon, “Fendt Favorit 515 C” | 110.3 kW (147.9 hp)Traktorenlexikon, “SAME Rubin 150” | Not comparableNot comparable on power at the PTO shaft: the 515 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Rubin 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 515 C and the Rubin 150. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 515 C and the Rubin 150. |
| Which pumps more oil for implements? | 93.0 L/min (24.6 gpm)Traktorenlexikon, “Fendt Favorit 515 C” | 70.5 L/min (18.6 gpm)Traktorenlexikon, “SAME Rubin 150” | AheadThe Fendt 515C has 32% more hydraulic flow (22.5 L/min / 5.9 gpm) than the Lamborghini Rubin 150 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 6,895 kg (15,201 lb)Traktorenlexikon, “Fendt Favorit 515 C” | 8,600 kg (18,960 lb)Traktorenlexikon, “SAME Rubin 150” | Not comparableNot comparable on three-point lift: the 515 C: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Favorit 515 C”); the Rubin 150: lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Rubin 150”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 5,540 kg (12,214 lb)Traktorenlexikon, “Fendt Favorit 515 C” | 6,845 kg (15,091 lb)Traktorenlexikon, “SAME Rubin 150” | Ahead (a fact, not an advantage)The Lamborghini Rubin 150 is 24% heavier (1,305 kg / 2,877 lb) than the Fendt 515C (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 10,500 kg (23,149 lb)Traktorenlexikon, “SAME Rubin 150” | No figureNo call on maximum permissible mass: no figure on record for the 515 C. |
| Which has the wider choice of gears? | — | 18 to 27Traktorenlexikon, “SAME Rubin 150” | No figureNo call on forward gears: no figure on record for the 515 C. |
| Which offers a creeper range? | YesTraktorenlexikon, “Fendt Favorit 515 C” | — | No figureNo call on a creeper range: not stated for the Rubin 150. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt Favorit 515 C” | 40 km/h (24.9 mph)Traktorenlexikon, “SAME Rubin 150” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Fendt Favorit 515 C” | 540/1000 rpmTraktorenlexikon, “SAME Rubin 150” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “SAME Rubin 150” | No figureNo call on PTO independence: not stated for the 515 C. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Fendt Favorit 515 C” | 4WDTraktorenlexikon, “SAME Rubin 150” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–1999 | 1998–2004 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt 515C has 32% more hydraulic flow (22.5 L/min / 5.9 gpm) than the Lamborghini Rubin 150 (both pump flow, as stated by the source).
- The Lamborghini Rubin 150 is 24% heavier (1,305 kg / 2,877 lb) than the Fendt 515C (both unladen weight, as stated by the source).
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 515 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Rubin 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the 515 C: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Favorit 515 C”); the Rubin 150: lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Rubin 150”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, forward gears, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources