Fendt Favorit 514 C vs WHITE 140

9 material differences · fewer than 12

Tractor one

Fendt Favorit 514 C

1993–1999

No measured PTO figure

Tractor two

WHITE 140

1987–1990

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (1993–1999; 1987–1990). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 4 fields identical or within 5%, which is not counted as material

Fendt Favorit 514 C and WHITE 140, field by field
FieldFavorit 514 C140Gap
Engine
Engine power, claimed claimed137.5 hp138 hp
Engine declaredMWM TD 226 B-6CUMMINS BTA 6-590differs
Displacement declared6.23 L5.89 L+6% Favorit 514 C
Maximum torque declared410 lb·ft · 556 N·m
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h18.6 mph · 30 km/hdiffers
Clutch declaredWet multi-plate clutch as driving clutch
Hydraulics & hitch
Hydraulic centre declaredOpen centre
Hydraulic control declaredLoad sensing
Pump flow declared26.9 gpm · 102 L/min
Three-point lift at ends declared7,335 lb · 3,327 kg
Rear PTO speeds declared540 rpm / 1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared12,214 lb · 5,540 kg12,401 lb · 5,625 kg
Wheelbase declared102.7 in · 2,609 mm111.5 in · 2,832 mm+9% 140
Length declared176.4 in · 4,480 mm175.0 in · 4,445 mm
Width declared96.1 in · 2,440 mm96.0 in · 2,438 mm
Height declared112.4 in · 2,855 mm119.0 in · 3,023 mm+6% 140
Ground clearance declared22.7 in · 576 mm27.2 in · 692 mm+20% 140
Turning radius, braked declared16.1 ft · 4.90 m12.6 ft · 3.84 m+28% Favorit 514 C
Fuel tank declared221.9 qt · 210 L100.4–132.1 qt · 95.0–125.0 Ldiffers

Fendt Favorit 514 C sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 514 C”
  • Source: Traktorenlexikon, “Fendt Favorit 615 LSA”

WHITE 140 sources

Source
  • Source: Traktorenlexikon, “White 140”