Fendt Favorit 514 C vs VALMET 8450 HiTech

9 material differences · fewer than 12

Tractor one

1993–1999

No measured PTO figure

Tractor two

1998–2003

No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 514 C and the 8450 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fendt Favorit 514 C and VALMET 8450 HiTech, field by field
Field	Favorit 514 C	8450 HiTech	Gap
Engine
Engine power, claimed claimed	137.5 hp	138 hp	—
Engine declared	MWM TD 226 B-6	VALMET 620 DWRE	differs
Displacement declared	6.23 L	6.59 L	+6% 8450 HiTech
Maximum torque declared	410 lb·ft · 556 N·m	454 lb·ft · 615 N·m	+11% 8450 HiTech
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Clutch declared	Wet multi-plate clutch as driving clutch	Pedal-operated, dry FICHTEL & SACHS single-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	26.9 gpm · 102 L/min	19.4 gpm · 73.6 L/min	+39% Favorit 514 C
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	—	15,212 lb · 6,900 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	12,214 lb · 5,540 kg	11,707 lb · 5,310 kg	—
Maximum permissible mass declared	—	18,739 lb · 8,500 kg	—
Wheelbase declared	102.7 in · 2,609 mm	100.7 in · 2,558 mm	—
Length declared	176.4 in · 4,480 mm	194.4 in · 4,937 mm	+10% 8450 HiTech
Width declared	96.1 in · 2,440 mm	92.7 in · 2,355 mm	—
Height declared	112.4 in · 2,855 mm	109.8 in · 2,790 mm	—
Ground clearance declared	22.7 in · 576 mm	20.3 in · 515 mm	+12% Favorit 514 C
Turning radius, braked declared	16.1 ft · 4.90 m	—	—
Fuel tank declared	221.9 qt · 210 L	174.4 qt · 165.0 L	+27% Favorit 514 C

Source

Source