12 material differences
Tractor oneFendt Favorit 514 C1993–1999No measured PTO figureTractor twoVALMET 84001993–2004No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 514 C and the 8400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Favorit 514 C | 8400 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 137.5 hp | 138.1 hp | — |
| Engine declared | MWM TD 226 B-6 | Valmet 620 DS | differs |
| Displacement declared | 6.23 L | 6.60 L | +6% 8400 |
| Maximum torque declared | 410 lb·ft · 556 N·m | 384 lb·ft · 520 N·m | +7% Favorit 514 C |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Wet multi-plate clutch as driving clutch | Pedal operated dry Fichtel & Sachs single plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 26.9 gpm · 102 L/min | 19.3 gpm · 73.2 L/min | +39% Favorit 514 C |
| Pressure declared | — | 2,031–2,248 psi · 140–155 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,214 lb · 5,540 kg | 11,111 lb · 5,040 kg | +10% Favorit 514 C |
| Maximum permissible mass declared | — | 19,842 lb · 9,000 kg | — |
| Wheelbase declared | 102.7 in · 2,609 mm | 100.7 in · 2,558 mm | — |
| Length declared | 176.4 in · 4,480 mm | 190.7 in · 4,844 mm | +8% 8400 |
| Width declared | 96.1 in · 2,440 mm | 90.5 in · 2,298 mm | +6% Favorit 514 C |
| Ground clearance declared | 22.7 in · 576 mm | 20.1 in · 510 mm | +13% Favorit 514 C |
| Turning radius, braked declared | 16.1 ft · 4.90 m | — | — |
| Fuel tank declared | 221.9 qt · 210 L | 174.4 qt · 165.0 L | +27% Favorit 514 C |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 514 C sources
Source
- Source: Traktorenlexikon, “Fendt Favorit 514 C”
- Source: Traktorenlexikon, “Fendt Favorit 615 LSA”
VALMET 8400 sources
Source
- Source: Traktorenlexikon, “Valmet 8400”
- Source: Traktorenlexikon, “Massey Ferguson MF 3670”