8 material differences · fewer than 12
Tractor oneFendt Favorit 511 C1994–1999No measured PTO figureTractor twoMassey Ferguson MF 36101987–1990No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 511 C and the MF 3610 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Favorit 511 C | MF 3610 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 112.9 hp | 111.6 hp | — |
| Engine declared | MWM D 226 | Perkins A 6.354-4 | differs |
| Displacement declared | 6.23 L | 5.80 L | +7% Favorit 511 C |
| Maximum torque declared | 336 lb·ft · 456 N·m | 272 lb·ft · 369 N·m | +24% Favorit 511 C |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal operated dry and air-cooled VALEO single disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 27.5 gpm · 104.0 L/min | — | — |
| Pressure declared | 2,901 psi · 200 bar | 2,277–2,350 psi · 157–162 bar | differs |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,684 lb · 5,300 kg | 11,585 lb · 5,255 kg | — |
| Wheelbase declared | 101.9 in · 2,589 mm | 109.3 in · 2,777 mm | +7% MF 3610 |
| Length declared | 174.6 in · 4,435 mm | 183.0 in · 4,649 mm | — |
| Width declared | 93.7 in · 2,380 mm | 82.2 in · 2,088 mm | +14% Favorit 511 C |
| Ground clearance declared | 21.1 in · 536 mm | 16.9 in · 428 mm | +25% Favorit 511 C |
| Turning radius, braked declared | 14.4 ft · 4.40 m | — | — |
| Fuel tank declared | — | 274.7 qt · 260.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 511 C sources
- Source: Traktorenlexikon, “Fendt Favorit 511 C”
Massey Ferguson MF 3610 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 3610”
- Source: Traktorenlexikon, “Massey Ferguson MF 399”