9 material differences · fewer than 12

Tractor oneFendt Favorit 511 C1994–1999No measured PTO figureTractor twoHürlimann XT 910.6 Turbo1999–2004No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 511 C and the XT 910.6 Turbo → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 4 fields identical or within 5%, which is not counted as material

Fendt Favorit 511 C and Hürlimann XT 910.6 Turbo, field by field
FieldFavorit 511 CXT 910.6 TurboGap
Engine
Engine power, claimed claimed112.9 hp113.3 hp—
Engine declaredMWM D 226Hürlimann H-1000.6 W 1 Tdiffers
Displacement declared6.23 L6.00 L—
Maximum torque declared336 lb·ft · 456 N·m309 lb·ft · 419 N·m+9% Favorit 511 C
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h24.9 mph · 40 km/hdiffers
Clutch declared—Hydraulically operated, under load shiftable wet multi-disc clutch—
Hydraulics & hitch
Hydraulic control declared—Load sensing—
Pump flow declared27.5 gpm · 104.0 L/min12.8 gpm · 48.5 L/min+114% Favorit 511 C
Pressure declared2,901 psi · 200 bar——
Rear PTO speeds declared540 rpm / 1000 rpm540/1000/540E/1000E rpmdiffers
Weight & dimensions
Unladen weight declared11,684 lb · 5,300 kg10,318 lb · 4,680 kg+13% Favorit 511 C
Maximum permissible mass declared—15,432 lb · 7,000 kg—
Wheelbase declared101.9 in · 2,589 mm103.7 in · 2,635 mm—
Length declared174.6 in · 4,435 mm175.2 in · 4,450 mm—
Width declared93.7 in · 2,380 mm88.6 in · 2,250 mm+6% Favorit 511 C
Ground clearance declared21.1 in · 536 mm18.5 in · 470 mm+14% Favorit 511 C
Turning radius, braked declared14.4 ft · 4.40 m15.3 ft · 4.67 m+6% XT 910.6 Turbo
Fuel tank declared—147.9 qt · 140.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 511 C sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 511 C”

Hürlimann XT 910.6 Turbo sources

Source
  • Source: Traktorenlexikon, “Hürlimann XT 910.6 Turbo”