10 material differences · fewer than 12
Tractor oneFendt Favorit 511 C1994–1999No measured PTO figureTractor twoHürlimann H-6115 Elite1991–1996No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 511 C and the H-6115 Elite → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Favorit 511 C | H-6115 Elite | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 112.9 hp | 113.3 hp | — |
| Engine declared | MWM D 226 | Hürlimann H-1000.6 W | differs |
| Displacement declared | 6.23 L | 6.00 L | — |
| Maximum torque declared | 336 lb·ft · 456 N·m | 279 lb·ft · 378 N·m | +21% Favorit 511 C |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 27.5 gpm · 104.0 L/min | 16.1 gpm · 60.9 L/min | +71% Favorit 511 C |
| Pressure declared | 2,901 psi · 200 bar | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000/540E/1000E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,684 lb · 5,300 kg | 10,759 lb · 4,880 kg | +9% Favorit 511 C |
| Wheelbase declared | 101.9 in · 2,589 mm | 108.3 in · 2,750 mm | +6% H-6115 Elite |
| Length declared | 174.6 in · 4,435 mm | 179.5 in · 4,560 mm | — |
| Width declared | 93.7 in · 2,380 mm | 88.6–98.4 in · 2,250–2,500 mm | differs |
| Ground clearance declared | 21.1 in · 536 mm | 19.3 in · 490 mm | +9% Favorit 511 C |
| Turning radius, braked declared | 14.4 ft · 4.40 m | 16.5 ft · 5.02 m | +14% H-6115 Elite |
| Fuel tank declared | — | 221.9 qt · 210.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 511 C sources
- Source: Traktorenlexikon, “Fendt Favorit 511 C”
Hürlimann H-6115 Elite sources
- Source: Traktorenlexikon, “Hürlimann 6115 XB Elite”