13 material differences
Tractor oneFendt Favorit 510 C1993–2000No measured PTO figureTractor twoUTB U-1033 (DT)1994–2004No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 510 C and the U-1033 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Favorit 510 C | U-1033 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.1 hp | 103.5 hp | — |
| Engine declared | MWM TD 226. B-4 | UTB 261.073 | differs |
| Displacement declared | 4.16 L | 5.64 L | +36% U-1033 (DT) |
| Maximum torque declared | 308 lb·ft · 417 N·m | 271 lb·ft · 368 N·m | +13% Favorit 510 C |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Wet multi-disc drive clutch | dry U.T.B. double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 26.9 gpm · 102.0 L/min | — | — |
| Pressure declared | 2,901 psi · 200 bar | 2,031 psi · 140 bar | +43% Favorit 510 C |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,957 lb · 4,970 kg | 9,700 lb · 4,400 kg | +13% Favorit 510 C |
| Wheelbase declared | 91.9 in · 2,333 mm | 100.4 in · 2,550 mm | +9% U-1033 (DT) |
| Length declared | 164.6 in · 4,180 mm | 172.8 in · 4,390 mm | — |
| Width declared | 89.8 in · 2,280 mm | 76.3 in · 1,939 mm | +18% Favorit 510 C |
| Ground clearance declared | 21.1 in · 536 mm | 13.8 in · 350 mm | +53% Favorit 510 C |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 14.8 ft · 4.50 m | +13% U-1033 (DT) |
| Fuel tank declared | 142.7 qt · 135 L | 169.1 qt · 160.0 L | +19% U-1033 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 510 C sources
Source
- Source: Traktorenlexikon, “Fendt Favorit 510 C”
- Source: Traktorenlexikon, “Fendt Farmer 308”
UTB U-1033 (DT) sources
Source
- Source: Traktorenlexikon, “UTB U 1033 DT”