Fendt Favorit 509 C vs VALMET 6400-4

11 material differences · fewer than 12

Tractor one

1994–2000

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 509 C and the 6400-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fendt Favorit 509 C and VALMET 6400-4, field by field
Field	Favorit 509 C	6400-4	Gap
Engine
Engine power, claimed claimed	93.2 hp	93.7 hp	—
Engine declared	MWM TD 226. B-4	VALMET 420 DS/420 DW/420 DWRE/44 ET	differs
Displacement declared	4.16 L	4.40 L	+6% 6400-4
Maximum torque declared	281 lb·ft · 381 N·m	—	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Wet multi-plate drive clutch	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	26.5 gpm · 100.2 L/min	18.0 gpm · 68.2 L/min	+47% Favorit 509 C
Pressure declared	2,538 psi · 175 bar	—	—
Rear PTO speeds declared	540 rpm / 750 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,957 lb · 4,970 kg	9,259 lb · 4,200 kg	+18% Favorit 509 C
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	91.9 in · 2,333 mm	91.6 in · 2,326 mm	—
Length declared	164.6 in · 4,180 mm	173.5 in · 4,408 mm	+5% 6400-4
Width declared	84.3 in · 2,140 mm	78.1 in · 1,985 mm	+8% Favorit 509 C
Height declared	110.0 in · 2,795 mm	107.7 in · 2,735 mm	—
Ground clearance declared	21.1 in · 536 mm	18.1 in · 460 mm	+17% Favorit 509 C
Turning radius, braked declared	13.1 ft · 4.00 m	13.8 ft · 4.20 m	—
Fuel tank declared	142.7 qt · 135 L	174.4 qt · 165.0 L	+22% 6400-4

Source

Source