12 material differences

Tractor oneFendt Favorit 509 C1994–2000No measured PTO figureTractor twoLamborghini 950 DT1995–2004No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 509 C and the 950 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 4 fields identical or within 5%, which is not counted as material

Fendt Favorit 509 C and Lamborghini 950 DT, field by field
FieldFavorit 509 C950 DTGap
Engine
Engine power, claimed claimed93.2 hp93.6 hp—
Engine declaredMWM TD 226. B-4SAME H-1000.4 WT-2differs
Displacement declared4.16 L4.00 L—
Maximum torque declared281 lb·ft · 381 N·m243 lb·ft · 329 N·m+16% Favorit 509 C
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h24.9 mph · 40 km/hdiffers
Clutch declaredWet multi-plate drive clutchPedal-operated dry S.L.H. single-plate clutchdiffers
Hydraulics & hitch
Hydraulic control declared—Load sensing—
Pump flow declared26.5 gpm · 100.2 L/min16.1 gpm · 61.0 L/min+64% Favorit 509 C
Pressure declared2,538 psi · 175 bar3,046 psi · 210 bar+20% 950 DT
Rear PTO speeds declared540 rpm / 750 rpm / 1000 rpm540/1000/540E/1000E rpmdiffers
Weight & dimensions
Unladen weight declared10,957 lb · 4,970 kg9,436 lb · 4,280 kg+16% Favorit 509 C
Maximum permissible mass declared—13,228 lb · 6,000 kg—
Wheelbase declared91.9 in · 2,333 mm93.4 in · 2,373 mm—
Length declared164.6 in · 4,180 mm149.0 in · 3,785 mm+10% Favorit 509 C
Width declared84.3 in · 2,140 mm72.4–101.6 in · 1,840–2,580 mmdiffers
Ground clearance declared21.1 in · 536 mm17.5 in · 445 mm+20% Favorit 509 C
Turning radius, braked declared13.1 ft · 4.00 m13.4 ft · 4.07 m—
Fuel tank declared142.7 qt · 135 L158.5 qt · 150.0 L+11% 950 DT

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 509 C sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 509 C”
  • Source: Traktorenlexikon, “Fendt Farmer 308”

Lamborghini 950 DT sources

Source
  • Source: Traktorenlexikon, “Lamborghini Premium 950 DT A”