9 material differences · fewer than 12
Tractor oneFendt Favorit 3s1967–1970No measured PTO figureTractor twoLeyland 2721975–1980No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 3s and the 272 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Favorit 3s | 272 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 60.9 hp | 72.0 hp | +18% 272 |
| Engine declared | MWM D 225.4 | LEYLAND-MOTORS 4/98 NT | differs |
| Displacement declared | 3.38 L | 3.77 L | +12% 272 |
| Maximum torque declared | 157 lb·ft · 213 N·m | 183 lb·ft · 248 N·m | +16% 272 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Tornado duplex clutch by Fichtel & Sachs | Dry BORG & BECK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.3 gpm · 31.6 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,986 lb · 2,715 kg | 6,684 lb · 3,032 kg | +12% 272 |
| Maximum permissible mass declared | 9,921 lb · 4,500 kg | — | — |
| Wheelbase declared | 89.0 in · 2,261 mm | 80.0 in · 2,032 mm | +11% Favorit 3s |
| Length declared | 151.4 in · 3,845 mm | 146.9 in · 3,730 mm | — |
| Width declared | 73.5 in · 1,868 mm | 80.3 in · 2,040 mm | +9% 272 |
| Ground clearance declared | 16.5 in · 420 mm | 15.8 in · 402 mm | — |
| Turning radius, braked declared | 12.1 ft · 3.70 m | 10.7 ft · 3.27 m | +13% Favorit 3s |
| Fuel tank declared | — | 72.1 qt · 68.2 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 3s sources
- Source: Traktorenlexikon, “Fendt Favorit 3 S/SA”
Leyland 272 sources
- Source: Traktorenlexikon, “Leyland 272”
- Source: Traktorenlexikon, “Leyland 270”