Fendt Farmer 312 or VALMET 8150?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Farmer 312 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt Farmer 312 and VALMET 8150, with the call on each
QuestionFarmer 3128150Call
Which puts more power through the PTO shaft?92 kW (123 hp)Traktorenlexikon, “Fendt Farmer 312”91.9 kW (123.2 hp)Traktorenlexikon, “Valmet Mega-8150”Not comparableNot comparable on power at the PTO shaft: the Farmer 312 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Farmer 312 and the 8150.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Farmer 312 and the 8150.
Which pumps more oil for implements?74.0 L/min (19.5 gpm)Traktorenlexikon, “Fendt Farmer 312 LSA”77.4 L/min (20.4 gpm)Traktorenlexikon, “Valmet Mega-8150”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?5,800 kg (12,787 lb)Traktorenlexikon, “Fendt Farmer 312 LSA”5,884 kg (12,972 lb)Traktorenlexikon, “Valmet Mega-8150”Not comparableNot comparable on three-point lift: the Farmer 312: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 312 LSA”); the 8150: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet Mega-8150”) — not the same quantity, basis and condition.
Which is heavier, for traction?5,350 kg (11,795 lb)Traktorenlexikon, “Fendt Farmer 312”4,900 kg (10,803 lb)Traktorenlexikon, “Valmet Mega-8150”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?8,000 kg (17,637 lb)Traktorenlexikon, “Fendt Farmer 312 LSA”8,000 kg (17,637 lb)Traktorenlexikon, “Valmet Mega-8150”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?36Traktorenlexikon, “Valmet Mega-8150”No figureNo call on forward gears: no figure on record for the Farmer 312.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Farmer 312 and the 8150.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Fendt Farmer 312”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Valmet Mega-8150”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/750/1000 rpmTraktorenlexikon, “Fendt Farmer 312 LSA”540/1000 rpmTraktorenlexikon, “Valmet Mega-8150”AheadThe Fendt Farmer 312 offers 750 rpm at the PTO, which the VALMET 8150 does not (as stated by the sources).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the Farmer 312 and the 8150.
Which drives on both axles?4WDTraktorenlexikon, “Fendt Farmer 312”; Traktorenlexikon, “Fendt Farmer 312 LSA”4WDTraktorenlexikon, “Valmet Mega-8150”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1993–20011995–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt Farmer 312 offers 750 rpm at the PTO, which the VALMET 8150 does not (as stated by the sources).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Farmer 312 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the Farmer 312: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 312 LSA”); the 8150: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet Mega-8150”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, forward gears, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources