3 material differences · fewer than 12
Tractor oneFendt Farmer 3101993–2001No measured PTO figureTractor twoFendt Favorit 510 C1993–2000No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (4WD / 2WD; 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
3 material differences · 11 fields identical or within 5%, which is not counted as material
| Field | Farmer 310 | Favorit 510 C | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103 hp | 103.1 hp | — |
| Engine declared | MWM TD 226. B-4 | MWM TD 226. B-4 | — |
| Displacement declared | 4.16 L | 4.16 L | — |
| Maximum torque declared | 309 lb·ft · 419 N·m | 308 lb·ft · 417 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | Wet multi-disc drive clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 19.8 gpm · 75.0 L/min | 26.9 gpm · 102.0 L/min | +36% Favorit 510 C |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/750/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,803 lb · 4,900 kg | 10,957 lb · 4,970 kg | — |
| Maximum permissible mass declared | 18,739 lb · 8,500 kg | — | — |
| Wheelbase declared | 91.9 in · 2,333 mm | 91.9 in · 2,333 mm | — |
| Length declared | 164.6 in · 4,180 mm | 164.6 in · 4,180 mm | — |
| Width declared | 89.8 in · 2,280 mm | 89.8 in · 2,280 mm | — |
| Ground clearance declared | 21.1 in · 536 mm | 21.1 in · 536 mm | — |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 13.1 ft · 4.00 m | — |
| Fuel tank declared | 142.7 qt · 135 L | 142.7 qt · 135 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Farmer 310 sources
- Source: Traktorenlexikon, “Fendt Farmer 310”
- Source: Traktorenlexikon, “Fendt Farmer 308”
Fendt Favorit 510 C sources
- Source: Traktorenlexikon, “Fendt Favorit 510 C”
- Source: Traktorenlexikon, “Fendt Farmer 308”