Fendt Farmer 308 Ci or Fiat F-100 DT?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Farmer 308 Ci has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the F-100 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fiat F-100 DT suits road haulage better on this data: 25% (1,500 kg / 3,307 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Farmer 308 Ci | F-100 DT | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 72 kW (97 hp)Traktorenlexikon, “Fendt Farmer 308 Ci” | 72.1 kW (96.7 hp)Traktorenlexikon, “Fiatagri F100 DT” | Not comparableNot comparable on power at the PTO shaft: the Farmer 308 Ci has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the F-100 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Farmer 308 Ci and the F-100 DT. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Farmer 308 Ci and the F-100 DT. |
| Which pumps more oil for implements? | 66.5 L/min (17.6 gpm)Traktorenlexikon, “Fendt Farmer 308 Ci” | — | No figureNo call on hydraulic flow: no figure on record for the F-100 DT. |
| Which lifts more on the three-point hitch? | 4,980 kg (10,979 lb)Traktorenlexikon, “Fendt Farmer 308 Ci” | 4,440 kg (9,789 lb)Traktorenlexikon, “Fiatagri F100 DT” | Not comparableNot comparable on three-point lift: the Farmer 308 Ci: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 308 Ci”); the F-100 DT: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Fiatagri F100 DT”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 3,850 kg (8,488 lb)Traktorenlexikon, “Fendt Farmer 308 Ci” | 4,800 kg (10,582 lb)Traktorenlexikon, “Fiatagri F100 DT” | Ahead (a fact, not an advantage)The Fiat F-100 DT is 25% heavier (950 kg / 2,094 lb) than the Fendt Farmer 308 Ci (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,000 kg (13,228 lb)Traktorenlexikon, “Fendt Farmer 308 Ci” | 7,500 kg (16,535 lb)Traktorenlexikon, “Fiatagri F100 DT” | AheadThe Fiat F-100 DT has 25% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fendt Farmer 308 Ci (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 21Traktorenlexikon, “Fendt Farmer 308 Ci” | 16 to 32Traktorenlexikon, “Fiatagri F100 DT” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Farmer 308 Ci and the F-100 DT. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Fendt Farmer 308 Ci” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri F100 DT” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 750 rpm / 1000 rpmTraktorenlexikon, “Fendt Farmer 308 Ci” | 540/1000 rpmTraktorenlexikon, “Fiatagri F100 DT” | AheadThe Fendt Farmer 308 Ci offers 750 rpm at the PTO, which the Fiat F-100 DT does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Fiatagri F100 DT” | No figureNo call on PTO independence: not stated for the Farmer 308 Ci. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Fendt Farmer 308 Ci” | Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri F100 DT” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2003–2008 | 1990–1996 | Ahead (a fact, not an advantage)The Fendt Farmer 308 Ci is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fiat F-100 DT is 25% heavier (950 kg / 2,094 lb) than the Fendt Farmer 308 Ci (both unladen weight, as stated by the source).
- The Fiat F-100 DT has 25% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fendt Farmer 308 Ci (both maximum permissible mass, as stated by the source).
- The Fendt Farmer 308 Ci offers 750 rpm at the PTO, which the Fiat F-100 DT does not (as stated by the sources).
- The Fendt Farmer 308 Ci is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Farmer 308 Ci has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the F-100 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the Farmer 308 Ci: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 308 Ci”); the F-100 DT: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Fiatagri F100 DT”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources