6 material differences · fewer than 12
Tractor oneFendt Farmer 275 S/SA1988–1996No measured PTO figureTractor twoMassey Ferguson MF 184 (A)1980–1983No measured PTO figure
Which should you choose?
Read our verdict on the Farmer 275 S/SA and the MF 184 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Farmer 275 S/SA | MF 184 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74 hp | 67 hp | +10% Farmer 275 S/SA |
| Engine declared | KHD F4L 913 | Perkins A 4.236 | differs |
| Displacement declared | 4.09 L | 3.87 L | +6% Farmer 275 S/SA |
| Maximum torque declared | 195 lb·ft · 265 N·m | 196 lb·ft · 266 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | dry double clutch from Fichtel & Sachs | pedal operated dry LUK double clutch with 279 mm diameter | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 10.9 gpm · 41.1 L/min | — | — |
| Pressure declared | 2,408 psi · 166 bar | 2,418 psi · 167 bar | — |
| Rear PTO speeds declared | 540/750 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,908 lb · 2,680 kg | 5,335 lb · 2,420 kg | +11% Farmer 275 S/SA |
| Wheelbase declared | 85.8 in · 2,180 mm | 88.2 in · 2,240 mm | — |
| Length declared | 143.5 in · 3,646 mm | 142.5 in · 3,620 mm | — |
| Width declared | 74.0 in · 1,880 mm | — | — |
| Ground clearance declared | 14.9 in · 378 mm | — | — |
| Turning radius, braked declared | — | 11.2 ft · 3.42 m | — |
| Fuel tank declared | 63.4 qt · 60 L | 64.5 qt · 61.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Farmer 275 S/SA sources
- Source: Traktorenlexikon, “Fendt Farmer 275 S/SA”
- Source: Traktorenlexikon, “Deutz-Fahr DX 3.90”
Massey Ferguson MF 184 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 184”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”