Fendt 240 S vs Steyr 8045 (a)

12 material differences

Tractor one

1987–1993

No measured PTO figure

Tractor two

1988–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 240 S and the 8045 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 1 fields identical or within 5%, which is not counted as material

Fendt 240 S and Steyr 8045 (a), field by field
Field	240 S	8045 (a)	Gap
Engine
Engine power, claimed claimed	39.3 hp	41.4 hp	+5% 8045 (a)
Engine declared	KHD F3L 912	Steyr WD 308.48	differs
Displacement declared	2.83 L	2.36 L	+20% 240 S
Maximum torque declared	121 lb·ft · 164 N·m	111 lb·ft · 150 N·m	+9% 240 S
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% 240 S
Clutch declared	—	Dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Pressure declared	—	3,553 psi · 245 bar	—
Three-point lift at ends declared	5,401 lb · 2,450 kg	4,299 lb · 1,950 kg	+26% 240 S
Rear PTO speeds declared	540/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,038 lb · 2,285 kg	4,189 lb · 1,900 kg	+20% 240 S
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	80.7 in · 2,050 mm	74.8 in · 1,899 mm	+8% 240 S
Length declared	139.2 in · 3,535 mm	130.9 in · 3,324 mm	+6% 240 S
Width declared	65.9 in · 1,675 mm	66.1 in · 1,679 mm	—
Height declared	90.2 in · 2,290 mm	83.9 in · 2,132 mm	+7% 240 S
Ground clearance declared	13.9 in · 353 mm	16.3 in · 415 mm	+18% 8045 (a)
Turning radius, braked declared	—	10.5 ft · 3.21 m	—
Fuel tank declared	63.4 qt · 60 L	56.0 qt · 53.0 L	+13% 240 S

Source

Source