9 material differences · fewer than 12
Tractor oneFendt 240 S1987–1993No measured PTO figureTractor twoFord 2120 (A)1987–1991No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (41%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 240 S | 2120 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 39.3 hp | 39.4 hp | — |
| Engine declared | KHD F3L 912 | ISHIKAWAJIMA-SHIBAURA T-854 B | differs |
| Displacement declared | 2.83 L | 2.30 L | +23% 240 S |
| Maximum torque declared | 121 lb·ft · 164 N·m | 89 lb·ft · 121 N·m | +36% 240 S |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 15.5 mph · 25 km/h | +60% 240 S |
| Clutch declared | — | Pedal operated dry Daikin double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.9 gpm · 37.5 L/min | — |
| Pressure declared | — | 1,697 psi · 117 bar | — |
| Rear PTO speeds declared | 540/750 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,038 lb · 2,285 kg | 3,571 lb · 1,620 kg | +41% 240 S |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 80.7 in · 2,050 mm | 74.4 in · 1,890 mm | +8% 240 S |
| Length declared | 139.2 in · 3,535 mm | 137.2 in · 3,485 mm | — |
| Width declared | 65.9 in · 1,675 mm | 64.2–90.4 in · 1,631–2,295 mm | differs |
| Ground clearance declared | 13.9 in · 353 mm | 13.8 in · 350 mm | — |
| Fuel tank declared | 63.4 qt · 60 L | 44.4 qt · 42.0 L | +43% 240 S |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 240 S sources
- Source: Traktorenlexikon, “Fendt Farmer 240 S”
- Source: Traktorenlexikon, “Deutz D 4006 P”
Ford 2120 (A) sources
- Source: Traktorenlexikon, “Ford 2120”
- Source: Traktorenlexikon, “Ford 2110”