9 material differences · fewer than 12

Tractor oneFendt 209 PA2002–2009No measured PTO figureTractor twoURSUS 10441997–1999No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (67%); the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (2002–2009; 1997–1999). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 2 fields identical or within 5%, which is not counted as material

Fendt 209 PA and URSUS 1044, field by field
Field209 PA1044Gap
Engine
Engine power, claimed claimed89 hp89 hp—
Engine declared—URSUS T-4390—
Displacement declared—3.86 L—
Maximum torque declared250 lb·ft · 339 N·m249 lb·ft · 338 N·m—
Transmission
Top speed declared24.9 mph · 40 km/h18.6 mph · 30 km/h+33% 209 PA
Clutch declareddry multi-plate clutchPedal-operated, dry hydraulic ZTS-MARTIN single-disc clutchdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensing——
Pump flow declared19.5 gpm · 74.0 L/min——
Pressure declared—2,828 psi · 195 bar—
Rear PTO speeds declared540/750/1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,404 lb · 2,905 kg10,692 lb · 4,850 kg+67% 1044
Maximum permissible mass declared11,023 lb · 5,000 kg——
Wheelbase declared87.4 in · 2,221 mm95.9 in · 2,435 mm+10% 1044
Length declared144.3 in · 3,665 mm164.8 in · 4,185 mm+14% 1044
Width declared65.6 in · 1,666 mm82.2 in · 2,087 mm+25% 1044
Ground clearance declared11.6 in · 295 mm15.0 in · 382 mm+29% 1044
Turning radius, braked declared—15.7 ft · 4.78 m—
Fuel tank declared74.0 qt · 70 L137.4 qt · 130.0 L+86% 1044

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt 209 PA sources

Source
  • Source: Traktorenlexikon, “Fendt Farmer 209 PA”

URSUS 1044 sources

Source
  • Source: Wikipedia (pl): Ursus 1044 (open data)
  • Source: Traktorenlexikon, “Ursus 1042/1044”