7 material differences · fewer than 12
Tractor oneFendt Farmer 201 S1975–1987No measured PTO figureTractor twoMassey Ferguson MF 154 (A)1973–1983No measured PTO figure
Which should you choose?
Read our verdict on the Farmer 201 S and the MF 154 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Farmer 201 S | MF 154 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | — | 50.0 hp | — |
| Engine declared | KHD F3L 912 | Perkins AD 3.152 S | differs |
| Displacement declared | 2.83 L | 2.50 L | +13% Farmer 201 S |
| Maximum torque declared | 129 lb·ft · 175 N·m | 127 lb·ft · 173 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Farmer 201 S |
| Clutch declared | Air-cooled dual clutch | Pedal operated dry and air cooled LUK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 7.1 gpm · 27.0 L/min | — |
| Pressure declared | — | 2,418 psi · 166.7 bar | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,442 lb · 2,015 kg | 4,475 lb · 2,030 kg | — |
| Wheelbase declared | 77.5 in · 1,968 mm | 81.9 in · 2,080 mm | +6% MF 154 (A) |
| Length declared | 136.2 in · 3,460 mm | 138.6 in · 3,520 mm | — |
| Width declared | 67.1 in · 1,705 mm | — | — |
| Ground clearance declared | 15.7 in · 400 mm | 12.6 in · 320 mm | +25% Farmer 201 S |
| Turning radius, braked declared | — | 10.9 ft · 3.31 m | — |
| Fuel tank declared | — | 65.5 qt · 62.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Farmer 201 S sources
- Source: Traktorenlexikon, “Deutz D 4006 P”
- Source: Traktorenlexikon, “Fendt Farmer 201 S”
Massey Ferguson MF 154 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 154”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”