9 material differences · fewer than 12
Tractor oneFendt Farmer 104 S/SA1972–1982No measured PTO figureTractor twoFord 3055 (A)1971–1975No measured PTO figure
Which should you choose?
Read our verdict on the Farmer 104 S/SA and the 3055 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Farmer 104 S/SA | 3055 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.0 hp | 53.2 hp | — |
| Engine declared | MWM D 226-3 | Ford 182 DF | differs |
| Displacement declared | 3.12 L | 3.00 L | — |
| Maximum torque declared | 153 lb·ft · 208 N·m | 139 lb·ft · 188 N·m | +11% Farmer 104 S/SA |
| Transmission | |||
| Top speed declared | 17.8 mph · 28.7 km/h | 12.4–15.5 mph · 20–25 km/h | differs |
| Clutch declared | Tornado single-plate dry clutch from Fichtel & Sachs | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.0 gpm · 34.2 L/min | — | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 1000 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,302–6,140 lb · 2,405–2,785 kg | 4,224 lb · 1,916 kg | differs |
| Wheelbase declared | 81.2–84.4 in · 2,062–2,143 mm | 77.2 in · 1,960 mm | differs |
| Length declared | 144.9–145.3 in · 3,680–3,690 mm | 135.0 in · 3,430 mm | differs |
| Width declared | 74.2–74.8 in · 1,884–1,900 mm | 72.0 in · 1,830 mm | — |
| Ground clearance declared | 11.8–16.9 in · 300–430 mm | 19.5 in · 495 mm | differs |
| Turning radius, braked declared | 11.5–12.5 ft · 3.50–3.80 m | — | — |
| Fuel tank declared | — | 51.8 qt · 49 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Farmer 104 S/SA sources
- Source: Traktorenlexikon, “Fendt Farmer 104 S/SA”
- Source: Traktorenlexikon, “Renault 551 R7451”
Ford 3055 (A) sources
- Source: Traktorenlexikon, “Ford 3055”