Fendt Farmer 102 LS/LSA vs Hermann Lanz D 648 Allrad

7 material differences · fewer than 12

Tractor one

1981–1982

No measured PTO figure

Tractor two

1973–1978

No measured PTO figure

Which should you choose?

Read our verdict on the Farmer 102 LS/LSA and the D 648 Allrad → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 7 fields identical or within 5%, which is not counted as material

Fendt Farmer 102 LS/LSA and Hermann Lanz D 648 Allrad, field by field
Field	Farmer 102 LS/LSA	D 648 Allrad	Gap
Engine
Engine power, claimed claimed	47.1 hp	47.1 hp	—
Engine declared	MWM D 226.3.2	MWM D 225-3 ( 10/1973 bis 12/1974 )	differs
Displacement declared	3.12 L	—	—
Maximum torque declared	135 lb·ft · 183 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	17.6 mph · 28.4 km/h	+6% Farmer 102 LS/LSA
Clutch declared	Single-plate dry clutch	Maintenance-free dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	8.5 gpm · 32.3 L/min	—	—
Pressure declared	2,489 psi · 172 bar	—	—
Three-point lift at ends declared	4,453 lb · 2,020 kg	4,079 lb · 1,850 kg	+9% Farmer 102 LS/LSA
Rear PTO speeds declared	540/750/1000 rpm	595/980 rpm	differs
Weight & dimensions
Unladen weight declared	5,324 lb · 2,415 kg	5,291 lb · 2,400 kg	—
Maximum permissible mass declared	—	9,921 lb · 4,500 kg	—
Wheelbase declared	81.8 in · 2,078 mm	84.3 in · 2,140 mm	—
Length declared	144.5 in · 3,670 mm	141.7 in · 3,600 mm	—
Width declared	68.0 in · 1,726 mm	66.9 in · 1,700 mm	—
Height declared	91.3 in · 2,320 mm	51.2 in · 1,300 mm	+78% Farmer 102 LS/LSA
Ground clearance declared	15.0 in · 380 mm	14.6 in · 370 mm	—
Turning radius, braked declared	11.2 ft · 3.40 m	14.3 ft · 4.35 m	+28% D 648 Allrad
Fuel tank declared	77.1 qt · 73 L	74.0 qt · 70 L	—

Source

Source